| |
| — | projects:aqipad [2019/01/28 00:07] (current) – created q3k |
|---|
| | ====== AQIPAD 7, vel. Deutsche Tablet für Hackern ====== |
| | |
| | Some friendly visitors from Germany dumped a bunch of those as part of their visit. |
| | |
| | ===== Unfucking ===== |
| | |
| | ADB is enabled by default, and the tablets are rooted. To get a brand new Android 4.2.2 experience, do the following once connected to a computer: |
| | |
| | adb shell |
| | wipe data |
| | reboot |
| | |
| | That's it. If you don't speak Deutsch, go to Einstellungen -> Sprache and change it to whatever language you prefer. |
| | |
| | ===== Hardware info ===== |
| | |
| | ==== dmesg ==== |
| | |
| | On the stock Android 4.2.2: |
| | |
| | <6>[ 0.000000] Initializing cgroup subsys cpu |
| | <5>[ 0.000000] Linux version 3.0.36+ (incar@incarsoft) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #6 SMP PREEMPT Thu Aug 21 16:40:31 CST 2014 |
| | <4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d |
| | <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache |
| | <4>[ 0.000000] Machine: RK30board |
| | <6>[ 0.000000] memory reserve: Memory(base:0x7c400000 size:60M) reserved for <ion> |
| | <6>[ 0.000000] memory reserve: Memory(base:0x7bc00000 size:8M) reserved for <fb0 buf> |
| | <6>[ 0.000000] memory reserve: Memory(base:0x7b400000 size:8M) reserved for <camera_ipp_mem> |
| | <6>[ 0.000000] memory reserve: Total reserved 76M |
| | <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback |
| | <6>[ 0.000000] bootconsole [earlycon0] enabled |
| | <4>[ 0.000000] CPU SRAM: copied sram code from c0bcf000 to fef00010 - fef02308 |
| | <4>[ 0.000000] CPU SRAM: copied sram data from c0bd12f8 to fef02308 - fef02bec |
| | <4>[ 0.000000] sram_log: T* +_ ] | _ < # [ Dh w(/ 0 c C1| ; J |
| | <4>[ 0.000000] get_max_freq=600000 |
| | <3>[ 0.000000] CLKDATA_ERR: can't get a available nume and deno |
| | <3>[ 0.000000] CLKDATA_ERR: clk_frac_div can't get rate=49500000,uart0_frac_div |
| | <4>[ 0.000000] rk30_dvfs_init |
| | <6>[ 0.000000] L310 cache controller enabled |
| | <6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76040001, Cache size: 262144 B |
| | <4>[ 0.000000] DDR DEBUG: version 1.00 20130510 |
| | <4>[ 0.000000] DDR DEBUG: fix 2cs bug |
| | <4>[ 0.000000] DDR DEBUG: DDR3 Device |
| | <4>[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=1 Total Capability=512MB |
| | <4>[ 0.000000] DDR DEBUG: init success!!! freq=300MHz |
| | <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 |
| | <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 |
| | <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 |
| | <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 |
| | <4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0 |
| | <4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb |
| | <4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2 |
| | <4>[ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200) |
| | <7>[ 0.000000] On node 0 totalpages: 111616 |
| | <7>[ 0.000000] free_area_init_node: node 0, pgdat c0bcce60, node_mem_map c0000000 |
| | <7>[ 0.000000] Normal zone: 976 pages used for memmap |
| | <7>[ 0.000000] Normal zone: 0 pages reserved |
| | <7>[ 0.000000] Normal zone: 110640 pages, LIFO batch:31 |
| | <4>[ 0.000000] HighMem zone: 48 pages exceeds realsize 0 |
| | <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1a79000 s6976 r8192 d13504 u32768 |
| | <7>[ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096 |
| | <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 |
| | <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 110640 |
| | <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x001F0000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00200000@0x00080000(userdata),0x00002000@0x00280000(kpanic),0x00200000@0x00282000(system),-@0x00482000(user) bootver=2014-03-03#2.13 firmware_ver=4.1.1 |
| | <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) |
| | <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) |
| | <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) |
| | <6>[ 0.000000] Memory: 436MB = 436MB total |
| | <5>[ 0.000000] Memory: 416896k/416896k available, 107392k reserved, 0K highmem |
| | <5>[ 0.000000] Virtual kernel memory layout: |
| | <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) |
| | <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) |
| | <5>[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB) |
| | <5>[ 0.000000] vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB) |
| | <5>[ 0.000000] lowmem : 0xc0000000 - 0xde800000 ( 488 MB) |
| | <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) |
| | <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) |
| | <5>[ 0.000000] .init : 0xc0408000 - 0xc04ce000 ( 792 kB) |
| | <5>[ 0.000000] .text : 0xc04ce000 - 0xc0b56a90 (6691 kB) |
| | <5>[ 0.000000] .data : 0xc0b58000 - 0xc0bcecc8 ( 476 kB) |
| | <5>[ 0.000000] .bss : 0xc0bd2024 - 0xc1a77d68 (15000 kB) |
| | <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| | <6>[ 0.000000] Preemptible hierarchical RCU implementation. |
| | <6>[ 0.000000] NR_IRQS:448 |
| | <4>[ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks |
| | <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms |
| | <6>[ 0.000000] Console: colour dummy device 80x30 |
| | <6>[ 0.005168] Calibrating delay loop (skipped) preset value.. 623.79 BogoMIPS (lpj=3118983) |
| | <6>[ 0.014295] pid_max: default: 32768 minimum: 301 |
| | <6>[ 0.019945] Mount-cache hash table entries: 512 |
| | <6>[ 0.026320] Initializing cgroup subsys debug |
| | <6>[ 0.031109] Initializing cgroup subsys cpuacct |
| | <6>[ 0.036211] Initializing cgroup subsys freezer |
| | <6>[ 0.041246] CPU: Testing write buffer coherency: ok |
| | <4>[ 0.147794] CPU1: Booted secondary processor |
| | <6>[ 0.147891] Brought up 2 CPUs |
| | <6>[ 0.156027] SMP: Total of 2 processors activated (1247.59 BogoMIPS). |
| | <6>[ 0.163899] devtmpfs: initialized |
| | <6>[ 0.183821] NET: Registered protocol family 16 |
| | <6>[ 0.189031] last_log: 0xdad00000 map to 0xdf004000 and copy to 0xc0bd6210 (version 2.1) |
| | <4>[ 0.220096] DVFS MSG: AVS Value(index=0): 145 146 145 145 145 145 145 145 145 144 |
| | <6>[ 0.239413] lcdc0 is used as primary display device contoller! |
| | <6>[ 0.245975] warning:lcdc1 not add to system! |
| | <6>[ 0.351336] rk29sdk_wifi_bt_gpio_control_init: init finished |
| | <6>[ 0.360247] console [ttyFIQ0] enabled, bootconsole disabled |
| | <6>[ 0.369512] Registered FIQ tty driver dac8fc00 |
| | <6>[ 0.370596] Loaded driver for PL330 DMAC-1 rk29-pl330 |
| | <6>[ 0.370671] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 |
| | <6>[ 0.370973] Loaded driver for PL330 DMAC-2 rk29-pl330 |
| | <6>[ 0.371042] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 |
| | <6>[ 0.402669] bio: create slab <bio-0> at 0 |
| | <4>[ 0.407125] wm831x_dcdc_init |
| | <4>[ 0.407679] wm831x_ldo_init |
| | <5>[ 0.408555] SCSI subsystem initialized |
| | <6>[ 0.409049] usbcore: registered new interface driver usbfs |
| | <6>[ 0.409290] usbcore: registered new interface driver hub |
| | <6>[ 0.410289] usbcore: registered new device driver usb |
| | <6>[ 0.411102] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter |
| | <6>[ 0.411797] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter |
| | <6>[ 0.412257] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter |
| | <6>[ 0.412565] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter |
| | <6>[ 0.413010] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter |
| | <6>[ 0.459349] rk30-adc rk30-adc: rk30 adc: driver initialized |
| | <4>[ 0.633393] protection lower power ..... |
| | <6>[ 0.637398] rk30_adc_battery: driver initialized |
| | <6>[ 0.642682] Advanced Linux Sound Architecture Driver Version 1.0.24. |
| | <6>[ 0.650117] Bluetooth: Core ver 2.16 |
| | <6>[ 0.653936] NET: Registered protocol family 31 |
| | <6>[ 0.658466] Bluetooth: HCI device and connection manager initialized |
| | <6>[ 0.664913] Bluetooth: HCI socket layer initialized |
| | <6>[ 0.669866] Bluetooth: L2CAP socket layer initialized |
| | <6>[ 0.675028] Bluetooth: SCO socket layer initialized |
| | <6>[ 0.680457] cfg80211: Calling CRDA to update world regulatory domain |
| | <4>[ 0.689020] rk fb probe ok! |
| | <3>[ 0.692450] i2c i2c-1: No ack, Maybe slave(addr: 0x5a) not exist or abnormal power-on, retry 2... |
| | <3>[ 0.692826] i2c i2c-1: No ack, Maybe slave(addr: 0x5a) not exist or abnormal power-on, retry 1... |
| | <3>[ 0.693185] i2c i2c-1: No ack, Maybe slave(addr: 0x5a) not exist or abnormal power-on, retry 0... |
| | <4>[ 0.693287] The device is not act8846 |
| | <4>[ 0.693421] i2c-core: driver [act8846] using legacy suspend method |
| | <4>[ 0.693495] i2c-core: driver [act8846] using legacy resume method |
| | <4>[ 0.693581] wm831x_i2c_init |
| | <3>[ 0.694355] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 2... |
| | <3>[ 0.695114] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 1... |
| | <3>[ 0.695863] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 0... |
| | <3>[ 0.695972] wm831x 1-0034: Failed to read parent ID: -11 |
| | <4>[ 0.696056] wm831x: probe of 1-0034 failed with error -11 |
| | <4>[ 0.728508] tps65910_pre_init,line=20 |
| | <6>[ 0.731476] TPS65910 Set default voltage. |
| | <4>[ 0.733829] tps65910_pre_init,line=268 |
| | <4>[ 0.786463] tps65910_post_init,line=277 |
| | <4>[ 0.786524] tps65910_post_init:g_pmic_type=2 |
| | <4>[ 0.789216] tps65910_post_init vdd_core =1200000mV end |
| | <4>[ 0.791948] tps65910_post_init vdd_cpu =1200000mV end |
| | <4>[ 0.807842] tps65910_post_init vio =3300000mV end |
| | <4>[ 0.813163] tps65910_post_init,line=305 END |
| | <4>[ 0.813229] tps65910_i2c_probe:irq=171,irq_base=384,gpio_base=288 |
| | <6>[ 0.823747] tps65910-rtc tps65910-rtc: rtc core: registered tps65910 as rtc0 |
| | <4>[ 0.827069] tps65910_rtc_probe:ok |
| | <6>[ 0.827240] Switching to clocksource timer1 |
| | <6>[ 0.827880] Switched to NOHz mode on CPU #1 |
| | <6>[ 0.837066] Switched to NOHz mode on CPU #0 |
| | <4>[ 0.842646] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf0ac000 |
| | <4>[ 0.842788] fb0:win0 |
| | <4>[ 0.842800] fb1:win1 |
| | <4>[ 0.842810] fb2:win2 |
| | <4>[ 0.843032] rk3066b lcdc0 clk enable... |
| | <4>[ 0.868271] rk3066b lcdc0 clk disable... |
| | <4>[ 0.886861] fb0:phy:7bc00000>>vir:e0000000>>len:0x800000 |
| | <4>[ 0.887439] rk_fb_register>>>>>fb0 |
| | <4>[ 0.896116] rk_fb_register>>>>>fb1 |
| | <4>[ 0.896253] rk3066b lcdc0 clk enable... |
| | <4>[ 0.896332] lcdc0: dclk:49500000>>fps:60 rk3066b_load_screen for lcdc0 ok! |
| | <6>[ 0.896423] lcdc0 win0 open |
| | <4>[ 0.920931] rk3066b lcdc0 probe ok! |
| | <4>[ 0.921211] pwm_regulator_probe:n_voltages=24 |
| | <6>[ 0.921610] pwm_regulator.0: driver initialized |
| | <4>[ 0.931729] stephen for pwm1 output ****** pwm_regulator_set_voltage:ok,vol=1100000,pwm_value=80 |
| | <3>[ 0.947622] emmc emmc: internal_storage is NOT emmc |
| | <6>[ 0.948055] NET: Registered protocol family 2 |
| | <6>[ 0.948356] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) |
| | <6>[ 0.949055] TCP established hash table entries: 16384 (order: 5, 131072 bytes) |
| | <6>[ 0.949765] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) |
| | <6>[ 0.950530] TCP: Hash tables configured (established 16384 bind 16384) |
| | <6>[ 0.950608] TCP reno registered |
| | <6>[ 0.950661] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| | <6>[ 0.950767] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| | <6>[ 0.951477] NET: Registered protocol family 1 |
| | <4>[ 1.057716] RK29 Backlight Driver Initialized. |
| | <6>[ 1.058213] Unpacking initramfs... |
| | <6>[ 1.325685] Freeing initrd memory: 1984K |
| | <6>[ 1.326070] PMU: registered new PMU device of type 0 |
| | <4>[ 1.327198] DVFS WARNING: vd_core : selector=86,but volt <=0 |
| | <4>[ 1.329140] DVFS WARNING: vd_cpu : selector=86,but volt <=0 |
| | <4>[ 1.344567] rk3188 cpufreq version 2.2, suspend freq 312 MHz |
| | <4>[ 1.347930] highmem bounce pool size: 64 pages |
| | <6>[ 1.348366] ashmem: initialized |
| | <6>[ 1.360458] fuse init (API version 7.16) |
| | <6>[ 1.363526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| | <6>[ 1.363634] io scheduler noop registered |
| | <6>[ 1.363694] io scheduler deadline registered |
| | <6>[ 1.363867] io scheduler cfq registered (default) |
| | <6>[ 1.378203] rga: Driver loaded succesfully |
| | <4>[ 1.379243] rk_serial.c v1.4 2013-06-21 |
| | <6>[ 1.379918] rk_serial rk_serial.0: dma_rx_buffer 0xffdfc000 |
| | <6>[ 1.380004] rk_serial rk_serial.0: dma_rx_phy 0x79e6a000 |
| | <6>[ 1.380155] rk_serial rk_serial.0: serial_rk_init_dma_rx sucess |
| | <6>[ 1.380243] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0 |
| | <6>[ 1.381039] rk_serial rk_serial.0: membase 0xdf0bc000 |
| | <6>[ 1.381316] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3 |
| | <6>[ 1.381950] rk_serial rk_serial.3: membase 0xdf0c0000 |
| | <6>[ 1.383078] Rockchip ion module(version: 1.0) is successfully loaded |
| | <6>[ 1.388147] loop: module loaded |
| | <6>[ 1.388245] Android kernel panic handler initialized (bind=kpanic) |
| | <6>[ 1.389484] PPP generic driver version 2.4.2 |
| | <6>[ 1.389844] PPP Deflate Compression module registered |
| | <6>[ 1.389900] PPP BSD Compression module registered |
| | <6>[ 1.391078] PPP MPPE Compression module registered |
| | <6>[ 1.391135] NET: Registered protocol family 24 |
| | <6>[ 1.391311] usbcore: registered new interface driver asix |
| | <6>[ 1.391432] usbcore: registered new interface driver cdc_ether |
| | <6>[ 1.391545] usbcore: registered new interface driver dm9620 |
| | <6>[ 1.391655] usbcore: registered new interface driver SR9700_android |
| | <6>[ 1.391780] usbcore: registered new interface driver net1080 |
| | <6>[ 1.391893] usbcore: registered new interface driver cdc_subset |
| | <6>[ 1.392004] usbcore: registered new interface driver zaurus |
| | <6>[ 1.392078] cdc_ncm: 04-Aug-2011 |
| | <6>[ 1.392170] usbcore: registered new interface driver cdc_ncm |
| | <4>[ 1.392226] Rockchip WiFi SYS interface (V1.00) ... |
| | <6>[ 1.392332] Initializing USB Mass Storage driver... |
| | <6>[ 1.392485] usbcore: registered new interface driver usb-storage |
| | <6>[ 1.392543] USB Mass Storage support registered. |
| | <6>[ 1.392746] usbcore: registered new interface driver usbserial |
| | <6>[ 1.392849] USB Serial support registered for generic |
| | <6>[ 1.392975] usbcore: registered new interface driver usbserial_generic |
| | <6>[ 1.393037] usbserial: USB Serial Driver core |
| | <6>[ 1.393126] USB Serial support registered for GSM modem (1-port) |
| | <6>[ 1.393246] usbcore: registered new interface driver option |
| | <6>[ 1.393300] option: v0.7.2:USB Driver for GSM modems |
| | <6>[ 1.607642] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode |
| | <6>[ 1.607692] usb20_otg usb20_otg: DWC OTG Controller |
| | <6>[ 1.607820] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1 |
| | <6>[ 1.607891] usb20_otg usb20_otg: irq 48, io mem 0x00000000 |
| | <6>[ 1.607925] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest |
| | <6>[ 1.608003] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| | <6>[ 1.608047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| | <6>[ 1.608090] usb usb1: Product: DWC OTG Controller |
| | <6>[ 1.608119] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd |
| | <6>[ 1.608154] usb usb1: SerialNumber: usb20_otg |
| | <6>[ 1.608504] hub 1-0:1.0: USB hub found |
| | <6>[ 1.608540] hub 1-0:1.0: 1 port detected |
| | <6>[ 1.611254] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000 |
| | <6>[ 1.821824] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode |
| | <6>[ 1.821871] usb20_host usb20_host: DWC OTG Controller |
| | <6>[ 1.821957] usb20_host usb20_host: new USB bus registered, assigned bus number 2 |
| | <6>[ 1.822026] usb20_host usb20_host: irq 49, io mem 0x00000000 |
| | <6>[ 1.822095] DWC_OTG: Init: Port Power? op_state=1 |
| | <6>[ 1.822125] DWC_OTG: Init: Power Port (0) |
| | <6>[ 1.822188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| | <6>[ 1.822232] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| | <6>[ 1.822275] usb usb2: Product: DWC OTG Controller |
| | <6>[ 1.822304] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd |
| | <6>[ 1.822339] usb usb2: SerialNumber: usb20_host |
| | <6>[ 1.822687] hub 2-0:1.0: USB hub found |
| | <6>[ 1.822723] hub 2-0:1.0: 1 port detected |
| | <6>[ 1.824072] android_usb gadget: Mass Storage Function, version: 2009/09/11 |
| | <6>[ 1.824119] android_usb gadget: Number of LUNs=2 |
| | <6>[ 1.824150] lun0: LUN: removable file: (no medium) |
| | <6>[ 1.824181] lun1: LUN: removable file: (no medium) |
| | <6>[ 1.824436] android_usb gadget: android_usb ready |
| | <6>[ 1.824657] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0 |
| | <6>[ 1.824969] usbcore: registered new interface driver xpad |
| | <6>[ 1.825042] usbcore: registered new interface driver usb_acecad |
| | <6>[ 1.825077] acecad: v3.2:USB Acecad Flair tablet driver |
| | <6>[ 1.825136] usbcore: registered new interface driver aiptek |
| | <6>[ 1.825170] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) |
| | <6>[ 1.825214] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen |
| | <6>[ 1.825281] usbcore: registered new interface driver gtco |
| | <4>[ 1.825314] GTCO usb driver version: 2.00.0006 |
| | <6>[ 1.825365] usbcore: registered new interface driver hanwang |
| | <6>[ 1.825426] usbcore: registered new interface driver kbtab |
| | <6>[ 1.825459] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver |
| | <6>[ 1.825543] usbcore: registered new interface driver wacom |
| | <6>[ 1.825577] wacom: v1.52:USB Wacom tablet driver |
| | <4>[ 1.825604] ==gsl_ts_init== |
| | <4>[ 1.825645] GSLX680 Enter gsl_ts_probe |
| | <4>[ 1.825669] ==kzalloc success= |
| | <4>[ 2.147434] [GSLX680] Enter gsl_ts_init_ts |
| | <6>[ 2.148120] input: gslX680 as /devices/platform/rk30_i2c.2/i2c-2/2-0040/input/input1 |
| | <4>[ 2.377408] =============gsl_load_fw start============== |
| | <4>[ 3.133564] =============gsl_load_fw end============== |
| | <4>[ 3.358270] [GSLX680] End gsl_ts_probe |
| | <4>[ 3.358440] ret=0 |
| | <4>[ 3.359032] sensor_register_slave:mma7660,id=18 |
| | <4>[ 3.359097] sensor_register_slave:mxc6225,id=20 |
| | <6>[ 3.359730] using rtc device, tps65910, for alarms |
| | <6>[ 3.360222] i2c /dev entries driver |
| | <6>[ 3.361999] lirc_dev: IR Remote Control driver registered, major 250 |
| | <6>[ 3.362082] IR NEC protocol handler initialized |
| | <6>[ 3.362139] IR RC5(x) protocol handler initialized |
| | <6>[ 3.362197] IR RC6 protocol handler initialized |
| | <6>[ 3.362252] IR JVC protocol handler initialized |
| | <6>[ 3.362307] IR Sony protocol handler initialized |
| | <6>[ 3.362361] IR RC5 (streamzap) protocol handler initialized |
| | <6>[ 3.362426] IR LIRC bridge handler initialized |
| | <6>[ 3.362479] Linux video capture interface: v2.00 |
| | <4>[ 3.363251] def_ref_volt: 1800mV, curr_ref_volt: 1800mV |
| | <4>[ 3.363319] start_charge_logo_display |
| | <6>[ 3.364395] device-mapper: uevent: version 1.0.3 |
| | <6>[ 3.365194] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com |
| | <6>[ 3.365624] Bluetooth: HCI UART driver ver 2.2 |
| | <6>[ 3.365690] Bluetooth: HCI H4 protocol initialized |
| | <6>[ 3.365751] Bluetooth: HCILL protocol initialized |
| | <6>[ 3.365902] cpuidle: using governor ladder |
| | <6>[ 3.365959] cpuidle: using governor menu |
| | <6>[ 3.411861] .Line3976..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc] |
| | <6>[ 3.412117] .Line3976..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sdio] |
| | <6>[ 3.414053] usbcore: registered new interface driver usbhid |
| | <6>[ 3.414097] usbhid: USB HID core driver |
| | <6>[ 3.414590] logger: created 256K log 'log_main' |
| | <6>[ 3.414744] logger: created 256K log 'log_events' |
| | <6>[ 3.414878] logger: created 256K log 'log_radio' |
| | <6>[ 3.415004] logger: created 256K log 'log_system' |
| | <6>[ 3.415696] |
| | <6>[ 3.415701] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc0] |
| | <4>[ 3.415767] |
| | <4>[ 3.415771] ================= |
| | <4>[ 3.415778] sdmmc_rescan..2022.. ====find no SDMMC host. [mmc0] |
| | <6>[ 3.415872] |
| | <6>[ 3.415876] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1] |
| | <4>[ 3.415958] es8323 probe i2c recv ok |
| | <4>[ 3.416139] i2c-core: driver [ES8323] using legacy suspend method |
| | <4>[ 3.416185] i2c-core: driver [ES8323] using legacy resume method |
| | <6>[ 3.416469] ES8323 audio_card_init |
| | <6>[ 3.416498] XXXXEnter::audio_card_init----215 |
| | <4>[ 3.416738] es8323_probe |
| | <6>[ 3.427410] rk29_sdmmc_change_clk_div..1706.. newDiv=40, newCLK=300Khz [sdio] |
| | <4>[ 4.068055] ES8323 4-0010: asoc: no dapm match for LINPUT1 --> NULL --> Left Line Mux |
| | <3>[ 4.068168] ES8323 4-0010: Failed to add route LINPUT1->Left Line Mux |
| | <4>[ 4.078140] es8323_probe:register ISR (irq=173) |
| | <4>[ 4.078189] probe,hp_det = 1,deinsert hp |
| | <6>[ 4.078237] Enter::rk29_es8323_init----142 |
| | <6>[ 4.090292] asoc: ES8323 HiFi <-> rk29_i2s.1 mapping ok |
| | <6>[ 4.090855] ALSA device list: |
| | <6>[ 4.090885] #0: RK29_ES8323 |
| | <6>[ 4.091015] GACT probability NOT on |
| | <6>[ 4.091050] Mirror/redirect action on |
| | <6>[ 4.091080] u32 classifier |
| | <6>[ 4.091102] Actions configured |
| | <6>[ 4.091131] Netfilter messages via NETLINK v0.30. |
| | <6>[ 4.091213] nf_conntrack version 0.5.0 (6545 buckets, 26180 max) |
| | <6>[ 4.091615] ctnetlink v0.93: registering with nfnetlink. |
| | <6>[ 4.091692] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 |
| | <6>[ 4.091743] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. |
| | <6>[ 4.092203] xt_time: kernel timezone is -0000 |
| | <6>[ 4.092403] ip_tables: (C) 2000-2006 Netfilter Core Team |
| | <6>[ 4.092603] arp_tables: (C) 2002 David S. Miller |
| | <6>[ 4.092691] TCP cubic registered |
| | <6>[ 4.092718] Initializing XFRM netlink socket |
| | <6>[ 4.093345] NET: Registered protocol family 10 |
| | <6>[ 4.094183] Mobile IPv6 |
| | <6>[ 4.094243] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| | <6>[ 4.094445] IPv6 over IPv4 tunneling driver |
| | <6>[ 4.095350] NET: Registered protocol family 17 |
| | <6>[ 4.095422] NET: Registered protocol family 15 |
| | <6>[ 4.099945] Bluetooth: RFCOMM TTY layer initialized |
| | <6>[ 4.100001] Bluetooth: RFCOMM socket layer initialized |
| | <6>[ 4.100040] Bluetooth: RFCOMM ver 1.11 |
| | <6>[ 4.100070] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| | <6>[ 4.100110] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 |
| | <6>[ 4.100303] NET: Registered protocol family 35 |
| | <4>[ 4.100745] |
| | <4>[ 4.100751] *****************sensor_mod_init..sp0838.. |
| | <6>[ 4.101016] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 |
| | <5>[ 4.101110] Registering SWP/SWPB emulation handler |
| | <3>[ 4.107474] rk_cam_cif(3162):rk3066b-camera version: v0.3.15 Zoom by ippget cif ldo failed! |
| | <4>[ 4.182476] DDR DEBUG: training 378Mhz[0]:0x3db00009-0x3db00009-0x3db00009-0x3db00009 |
| | <6>[ 4.182531] ddrfreq: get datatraing from 378Mhz to 378Mhz |
| | <6>[ 4.182733] ddrfreq: verion 3.2 20130917 |
| | <6>[ 4.182761] ddrfreq: fix cpu pause bug |
| | <6>[ 4.182791] ddrfreq: normal 378MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 300MHz |
| | <4>[ 4.187012] regulator_init_complete: VPLL: incomplete constraints, leaving on |
| | <6>[ 4.187151] i2c i2c-0: sensor_probe: gs_mma7660,0xdadb0600 |
| | <4>[ 4.187188] sensor_chip_init:gs_mma7660:devid=0x0,ops=0xc0bab888 |
| | <3>[ 4.197364] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 2... |
| | <4>[ 4.197525] get cif ldo failed! |
| | <3>[ 4.197652] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 1... |
| | <3>[ 4.197936] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 0... |
| | <3>[ 4.198164] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 2... |
| | <3>[ 4.198389] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 1... |
| | <3>[ 4.198614] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 0... |
| | <4>[ 4.198664] sensor_active:fail to active sensor |
| | <4>[ 4.198692] sensor_init:line=110,error |
| | <4>[ 4.198714] sensor_initial:fail to init sensor |
| | <4>[ 4.198740] sensor_chip_init:fail to init sensor |
| | <3>[ 4.198770] i2c i2c-0: sensor_probe failed -11 |
| | <3>[ 4.198777] |
| | <4>[ 4.198813] sensors: probe of 0-004c failed with error -11 |
| | <6>[ 4.198867] i2c i2c-0: sensor_probe: gs_mxc6225,0xdadb0800 |
| | <4>[ 4.198903] sensor_chip_init:gs_mxc6225:devid=0x0,ops=0xc0bab8e4 |
| | <6>[ 4.199860] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-0015/input/input2 |
| | <4>[ 4.200036] sensor_irq_init:use polling,delay=30 ms |
| | <4>[ 4.200184] sensor_misc_device_register:miscdevice: mma8452_daemon |
| | <4>[ 4.200225] sensor_probe:initialized ok,sensor name:mxc6225,type:2,id=20 |
| | <4>[ 4.200235] |
| | <6>[ 4.200313] sensor_init: Probe name sensors |
| | <4>[ 4.200355] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01 |
| | <6>[ 4.203559] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 01:43:04 UTC (946690984) |
| | <6>[ 4.203943] Freeing init memory: 792K |
| | <4>[ 4.224382] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. |
| | <4>[ 4.266731] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200 |
| | <6>[ 4.276278] keychord: using input dev rk29-keypad for fevent |
| | <3>[ 4.276478] init: cannot open '/initlogo.rle' |
| | <4>[ 4.317466] get cif ldo failed! |
| | <3>[ 4.348772] rk30xxnand_ko: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.0.36+ SMP preempt mod_unload ARMv7 ' |
| | <4>[ 4.357476] Probe gc2035_back_3 success |
| | <4>[ 4.359102] gp_rknand_info = : 0xdae5f700 |
| | <4>[ 4.359187] rk30_chip_set:1 |
| | <4>[ 4.359265] FtlInit! |
| | <4>[ 4.359299] No.1 FLASH ID:ad de 94 eb 74 44 |
| | <4>[ 4.363391] FTL version: 5.0.12 20140214 |
| | <4>[ 4.377374] get cif ldo failed! |
| | <4>[ 4.415285] get cif ldo failed! |
| | <4>[ 4.477577] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480 |
| | <3>[ 4.497783] i2c i2c-3: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2... |
| | <3>[ 4.498248] i2c i2c-3: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1... |
| | <3>[ 4.498711] i2c i2c-3: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0... |
| | <3>[ 4.498759] gc0308_back_4(rk_cam_sensor:320): read reg(0x0 val:0x0) failed, try to read again! |
| | <3>[ 4.498814] gc0308_back_4(rk_cam_sensor:679): read chip id failed |
| | <4>[ 4.517407] get cif ldo failed! |
| | <3>[ 4.557379] camera 33-1-gc0308_back_4: Probe gc0308_back_4 failed |
| | <4>[ 4.566782] gBootMedia = 1 gSdmmcFwPartOffset =0! |
| | <4>[ 4.566812] rknand_buffer.c version: 4.40 20130830! |
| | <5>[ 4.567003] 10 cmdlinepart partitions found on MTD device rk29xxnand |
| | <5>[ 4.567039] Creating 10 MTD partitions on "rk29xxnand": |
| | <5>[ 4.567071] 0x000000400000-0x000000800000 : "misc" |
| | <5>[ 4.567937] 0x000000800000-0x000001000000 : "kernel" |
| | <5>[ 4.568606] 0x000001000000-0x000002000000 : "boot" |
| | <5>[ 4.569186] 0x000002000000-0x000004000000 : "recovery" |
| | <5>[ 4.569774] 0x000004000000-0x000008000000 : "backup" |
| | <5>[ 4.570415] 0x000008000000-0x000010000000 : "cache" |
| | <5>[ 4.571104] 0x000010000000-0x000050000000 : "userdata" |
| | <5>[ 4.572471] 0x000050000000-0x000050400000 : "kpanic" |
| | <6>[ 4.574364] apanic: Bound to mtd partition 'kpanic' |
| | <6>[ 4.574394] apanic: No panic data available |
| | <5>[ 4.574436] 0x000050400000-0x000090400000 : "system" |
| | <5>[ 4.575824] 0x000090400000-0x0001d4000000 : "user" |
| | <4>[ 4.580068] get cif ldo failed! |
| | <4>[ 4.610004] get cif ldo failed! |
| | <4>[ 4.647716] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480 |
| | <3>[ 4.668140] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 4.668505] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 4.669031] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 4.669081] gc0329_back_5(rk_cam_sensor:154): write reg(0xfc, val:0x16) failed, try to write again! |
| | <3>[ 4.669653] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 4.670017] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 4.670543] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 4.670592] gc0329_back_5(rk_cam_sensor:154): write reg(0xfc, val:0x16) failed, try to write again! |
| | <3>[ 4.671160] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 4.671524] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 4.672526] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 4.672577] gc0329_back_5(rk_cam_sensor:154): write reg(0xfc, val:0x16) failed, try to write again! |
| | <3>[ 4.698294] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 4.699185] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 4.699775] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 4.699825] gc0329_back_5(rk_cam_sensor:320): read reg(0x0 val:0x0) failed, try to read again! |
| | <3>[ 4.699880] gc0329(917): gc0329 read chip id high byte failed |
| | <3>[ 4.699888] |
| | <3>[ 4.699920] gc0329(924): error: gc0329 mismatched pid = 0x0 |
| | <3>[ 4.699927] |
| | <3>[ 4.699962] gc0329_back_5(rk_cam_sensor:698): error: mismatched pid = 0x0 |
| | <3>[ 4.699971] |
| | <6>[ 4.716602] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: discard |
| | <4>[ 4.717492] get cif ldo failed! |
| | <3>[ 4.756072] camera 33-2-gc0329_back_5: Probe gc0329_back_5 failed |
| | <4>[ 4.768027] get cif ldo failed! |
| | <4>[ 4.824635] get cif ldo failed! |
| | <3>[ 4.859480] i2c i2c-3: 1 i2c clients have been registered at 0x3cget cif ldo failed! |
| | <3>[ 4.907421] camera 33-3-ov5640_back_6: Probe ov5640_back_6 failed |
| | <4>[ 4.927381] get cif ldo failed! |
| | <6>[ 4.952317] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: discard |
| | <4>[ 4.965587] get cif ldo failed! |
| | <6>[ 5.003703] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: discard |
| | <4>[ 5.008337] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200 |
| | <3>[ 5.027845] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2... |
| | <3>[ 5.028318] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1... |
| | <3>[ 5.028784] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0... |
| | <3>[ 5.028832] sp2518_back_7(rk_cam_sensor:320): read reg(0x2 val:0x0) failed, try to read again! |
| | <3>[ 5.028889] sp2518_back_7(rk_cam_sensor:679): read chip id failed |
| | <4>[ 5.047416] get cif ldo failed! |
| | <3>[ 5.077388] camera 33-4-sp2518_back_7: Probe sp2518_back_7 failed |
| | <4>[ 5.097364] get cif ldo failed! |
| | <3>[ 5.110334] init: /sbin/e2fsck terminated by exit(8) |
| | <3>[ 5.110375] init: Operational error while checking volume '/dev/block/mtdblock8' |
| | <3>[ 5.110521] init: Failed to mount /dev/block/mtdblock8, system didnot mount and will cause Android Error!!! |
| | <4>[ 5.127525] get cif ldo failed! |
| | <3>[ 5.129783] init: /sbin/e2fsck terminated by exit(8) |
| | <3>[ 5.129819] init: Operational error while checking volume '/dev/block/mtdblock6' |
| | <3>[ 5.129955] init: Failed to mount /dev/block/mtdblock6, format it to ext4 now |
| | <3>[ 5.156155] init: /sbin/e2fsck terminated by exit(8) |
| | <3>[ 5.157917] init: Operational error while checking volume '/dev/block/mtdblock5' |
| | <3>[ 5.158060] init: Failed to mount /dev/block/mtdblock5, format it to ext4 now |
| | <4>[ 5.168780] |
| | <4>[ 5.168784] sensor_probe..drivers/media/video/sp0838.c..2791.. |
| | <4>[ 5.168830] sp0838 sensor_ioctrl cmd(2) on(0) |
| | <4>[ 5.174355] rk30_mirroring: Unknown symbol video_data_to_mirroring (err 0) |
| | <4>[ 5.174429] rk30_mirroring: Unknown symbol audio_data_to_mirroring (err 0) |
| | <3>[ 5.177584] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2... |
| | <3>[ 5.179257] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1... |
| | <3>[ 5.180554] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0... |
| | <3>[ 5.180604] |
| | <3>[ 5.180607] sp0838 read reg(0x2 val:0x0) failed, try to read again! |
| | <3>[ 5.180658] sp0838 read chip id high byte failed |
| | <4>[ 5.180686] |
| | <4>[ 5.180688] sensor_probe..drivers/media/video/sp0838.c..2831 ret = ffffffed |
| | <4>[ 5.182075] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned. |
| | <4>[ 5.197399] get cif ldo failed! |
| | <3>[ 5.227431] camera 33-5-sp0838_back_8: Probe sp0838_back_8 failed |
| | <4>[ 5.247380] get cif ldo failed! |
| | <4>[ 5.277401] get cif ldo failed! |
| | <4>[ 5.317710] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480 |
| | <4>[ 5.357366] get cif ldo failed! |
| | <4>[ 5.387546] Probe gc0308_front_9 success |
| | <4>[ 5.407403] get cif ldo failed! |
| | <4>[ 5.437443] get cif ldo failed! |
| | <4>[ 5.478308] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480 |
| | <3>[ 5.497777] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 5.498255] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 5.498718] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 5.498830] gc0329_front_10(rk_cam_sensor:154): write reg(0xfc, val:0x16) failed, try to write again! |
| | <3>[ 5.499305] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 5.499764] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 5.500221] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 5.500330] gc0329_front_10(rk_cam_sensor:154): write reg(0xfc, val:0x16) failed, try to write again! |
| | <3>[ 5.500803] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 5.501262] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 5.501719] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 5.501828] gc0329_front_10(rk_cam_sensor:154): write reg(0xfc, val:0x16) failed, try to write again! |
| | <3>[ 5.527861] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2... |
| | <3>[ 5.528383] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1... |
| | <3>[ 5.528901] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0... |
| | <3>[ 5.528983] gc0329_front_10(rk_cam_sensor:320): read reg(0x0 val:0x0) failed, try to read again! |
| | <3>[ 5.529069] gc0329(917): gc0329 read chip id high byte failed |
| | <3>[ 5.529084] |
| | <3>[ 5.529137] gc0329(924): error: gc0329 mismatched pid = 0x0 |
| | <3>[ 5.529152] |
| | <3>[ 5.529205] gc0329_front_10(rk_cam_sensor:698): error: mismatched pid = 0x0 |
| | <3>[ 5.529223] |
| | <4>[ 5.547415] get cif ldo failed! |
| | <3>[ 5.577496] camera 33-7-gc0329_front_10: Probe gc0329_front_10 failed |
| | <4>[ 5.597415] get cif ldo failed! |
| | <4>[ 5.627475] get cif ldo failed! |
| | <4>[ 5.667650] |
| | <4>[ 5.667654] sensor_probe..drivers/media/video/sp0838.c..2791.. |
| | <4>[ 5.667699] sp0838 sensor_ioctrl cmd(2) on(0) |
| | <3>[ 5.670165] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2... |
| | <3>[ 5.670635] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1... |
| | <3>[ 5.671103] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0... |
| | <3>[ 5.671150] |
| | <3>[ 5.671153] sp0838 read reg(0x2 val:0x0) failed, try to read again! |
| | <3>[ 5.671201] sp0838 read chip id high byte failed |
| | <4>[ 5.671228] |
| | <4>[ 5.671231] sensor_probe..drivers/media/video/sp0838.c..2831 ret = ffffffed |
| | <4>[ 5.687370] get cif ldo failed! |
| | <3>[ 5.717455] camera 33-8-sp0838_front_11: Probe sp0838_front_11 failed |
| | <4>[ 5.717567] ipp irq 47 |
| | <4>[ 5.717815] IPP init, version rk30-ipp 1.003 |
| | <3>[ 5.837898] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' |
| | <3>[ 5.849425] init: cannot find '/system/bin/copyfile.sh', disabling 'copyfile' |
| | <3>[ 5.855025] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper' |
| | <4>[ 5.861070] vpu: power on |
| | <6>[ 5.861147] VPU_SERVICE: checking hw id 8270 |
| | <4>[ 5.869609] vpu: power off...done |
| | <6>[ 5.869667] VPU_SERVICE: init success |
| | <6>[ 5.992832] rk_serial rk_serial.0: serial_rk_startup: line:0 |
| | <6>[ 5.992946] rk_serial rk_serial.0: +serial_rk_set_termios line:0 |
| | <6>[ 5.993037] rk_serial rk_serial.0: uartclk:3225600 |
| | <6>[ 5.993084] rk_serial rk_serial.0: baud:9600 |
| | <6>[ 5.993126] rk_serial rk_serial.0: quot:21 |
| | <6>[ 5.993665] rk_serial rk_serial.0: serial_rk_startup: line:0 |
| | <6>[ 5.993755] rk_serial rk_serial.0: +serial_rk_set_termios line:0 |
| | <6>[ 5.993814] rk_serial rk_serial.0: uartclk:3225600 |
| | <6>[ 5.993860] rk_serial rk_serial.0: baud:9600 |
| | <6>[ 5.993901] rk_serial rk_serial.0: quot:21 |
| | <6>[ 5.993952] rk_serial rk_serial.0: serial_rk_init_dma_rx sucess |
| | <3>[ 5.995181] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}' |
| | <3>[ 5.995272] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial' |
| | <3>[ 5.995900] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead |
| | <3>[ 6.181893] android_usb: already disabled |
| | <4>[ 6.273903] RKNAND_GET_SN_SECTOR |
| | <4>[ 6.277247] return ret = 0 |
| | <4>[ 6.281870] RKNAND_GET_DRM_KEY |
| | <4>[ 6.283650] return ret = 0 |
| | <4>[ 6.315357] PVR_K: sys.gpvr.version=1.10 |
| | <6>[ 6.338654] .204.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc] |
| | <6>[ 6.338713] .235.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc] |
| | <6>[ 6.997900] rk3066b_lcdc_blank>>>>>0 |
| | <6>[ 7.001733] rk3066b_lcdc_blank>>>>>0 |
| | <4>[ 7.012772] rk fb use 3 buffers |
| | <6>[ 7.018989] rk3066b_lcdc_blank>>>>>0 |
| | <4>[ 7.137416] get cif ldo failed! |
| | <4>[ 7.169091] get cif ldo failed! |
| | <6>[ 7.174104] rk3066b_lcdc_blank>>>>>0 |
| | <3>[ 7.217427] gc2035_back_3(rk_cam_sensor:1162): generic_sensor_ioctl cmd(0x3) is unknown ! |
| | <3>[ 7.217443] |
| | <4>[ 7.507387] get cif ldo failed! |
| | <4>[ 7.557402] get cif ldo failed! |
| | <4>[ 7.589326] get cif ldo failed! |
| | <3>[ 7.627428] gc0308_front_9(rk_cam_sensor:1162): generic_sensor_ioctl cmd(0x3) is unknown ! |
| | <3>[ 7.627441] |
| | <3>[ 7.637272] gc0308_front_9(rk_cam_sensor:500): have not other series meet the requirement except init_serie,array_index = 0 |
| | <3>[ 7.770267] gc0308_front_9(rk_cam_sensor:500): have not other series meet the requirement except init_serie,array_index = 0 |
| | <3>[ 7.770379] gc0308_front_9(rk_cam_sensor:500): have not other series meet the requirement except init_serie,array_index = 0 |
| | <3>[ 7.770492] gc0308_front_9(rk_cam_sensor:500): have not other series meet the requirement except init_serie,array_index = 0 |
| | <3>[ 7.770569] gc0308_front_9(rk_cam_sensor:500): have not other series meet the requirement except init_serie,array_index = 0 |
| | <3>[ 7.770643] gc0308_front_9(rk_cam_sensor:500): have not other series meet the requirement except init_serie,array_index = 0 |
| | <4>[ 7.787395] get cif ldo failed! |
| | <3>[ 7.839064] gc2035_back_3(rk_cam_sensor:1162): generic_sensor_ioctl cmd(0x3) is unknown ! |
| | <3>[ 7.839075] |
| | <3>[ 7.845042] gc0308_front_9(rk_cam_sensor:1162): generic_sensor_ioctl cmd(0x3) is unknown ! |
| | <3>[ 7.845054] |
| | <6>[ 9.848166] DWC_OTG: dwc_otg_hcd_enable, disable host controller |
| | <6>[ 12.440081] warning: `zygote' uses 32-bit capabilities (legacy support in use) |
| | <4>[ 16.157390] not_reboot_chargeing,new=78,old=78,bat_capacity=78 |
| | <4>[ 16.163277] old_capacity = 78 , new_capacity =78, bat->bat_capacity=78,bat ->bat_status=1 |
| | |
| |
