Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

projects:aqipad [2019/01/28 00:07] (current)
q3k created
Line 1: Line 1:
 +====== AQIPAD 7, vel. Deutsche Tablet für Hackern ======
 +
 +Some friendly visitors from Germany dumped a bunch of those as part of their visit.
 +
 +===== Unfucking =====
 +
 +ADB is enabled by default, and the tablets are rooted. To get a brand new Android 4.2.2 experience, do the following once connected to a computer:
 +
 +  adb shell
 +  wipe data
 +  reboot
 +
 +That's it. If you don't speak Deutsch, go to Einstellungen -> Sprache and change it to whatever language you prefer.
 +
 +===== Hardware info =====
 +
 +==== dmesg ====
 +
 +On the stock Android 4.2.2:
 +
 +  <​6>​[ ​   0.000000] Initializing cgroup subsys cpu
 +  <​5>​[ ​   0.000000] Linux version 3.0.36+ (incar@incarsoft) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #6 SMP PREEMPT Thu Aug 21 16:40:31 CST 2014
 +  <​4>​[ ​   0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
 +  <​4>​[ ​   0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
 +  <​4>​[ ​   0.000000] Machine: RK30board
 +  <​6>​[ ​   0.000000] memory reserve: Memory(base:​0x7c400000 size:60M) reserved for <ion>
 +  <​6>​[ ​   0.000000] memory reserve: Memory(base:​0x7bc00000 size:8M) reserved for <fb0 buf>
 +  <​6>​[ ​   0.000000] memory reserve: Memory(base:​0x7b400000 size:8M) reserved for <​camera_ipp_mem>​
 +  <​6>​[ ​   0.000000] memory reserve: Total reserved 76M
 +  <​4>​[ ​   0.000000] Memory policy: ECC disabled, Data cache writeback
 +  <​6>​[ ​   0.000000] bootconsole [earlycon0] enabled
 +  <​4>​[ ​   0.000000] CPU SRAM: copied sram code from c0bcf000 to fef00010 - fef02308
 +  <​4>​[ ​   0.000000] CPU SRAM: copied sram data from c0bd12f8 to fef02308 - fef02bec
 +  <​4>​[ ​   0.000000] sram_log: ​  ​T* ​ +_       ] |  _ < #   ​[ ​        Dh w(/ 0  c  C1|  ;   ​J ​  
 +  <​4>​[ ​   0.000000] get_max_freq=600000
 +  <​3>​[ ​   0.000000] CLKDATA_ERR:​ can'​t get a available nume and deno
 +  <​3>​[ ​   0.000000] CLKDATA_ERR:​ clk_frac_div can't get rate=49500000,​uart0_frac_div
 +  <​4>​[ ​   0.000000] rk30_dvfs_init
 +  <​6>​[ ​   0.000000] L310 cache controller enabled
 +  <​6>​[ ​   0.000000] l2x0: 8 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76040001, Cache size: 262144 B
 +  <​4>​[ ​   0.000000] DDR DEBUG: version 1.00 20130510 ​
 +  <​4>​[ ​   0.000000] DDR DEBUG: fix 2cs bug
 +  <​4>​[ ​   0.000000] DDR DEBUG: DDR3 Device
 +  <​4>​[ ​   0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=1 Total Capability=512MB
 +  <​4>​[ ​   0.000000] DDR DEBUG: init success!!! freq=300MHz
 +  <​4>​[ ​   0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
 +  <​4>​[ ​   0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
 +  <​4>​[ ​   0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
 +  <​4>​[ ​   0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
 +  <​4>​[ ​   0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
 +  <​4>​[ ​   0.000000] DDR DEBUG: DRV Pull-Up=0xb,​ DRV Pull-Dwn=0xb
 +  <​4>​[ ​   0.000000] DDR DEBUG: ODT Pull-Up=0x2,​ ODT Pull-Dwn=0x2
 +  <​4>​[ ​   0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
 +  <​7>​[ ​   0.000000] On node 0 totalpages: 111616
 +  <​7>​[ ​   0.000000] free_area_init_node:​ node 0, pgdat c0bcce60, node_mem_map c0000000
 +  <​7>​[ ​   0.000000] ​  ​Normal zone: 976 pages used for memmap
 +  <​7>​[ ​   0.000000] ​  ​Normal zone: 0 pages reserved
 +  <​7>​[ ​   0.000000] ​  ​Normal zone: 110640 pages, LIFO batch:31
 +  <​4>​[ ​   0.000000] ​  ​HighMem zone: 48 pages exceeds realsize 0
 +  <​6>​[ ​   0.000000] PERCPU: Embedded 7 pages/cpu @c1a79000 s6976 r8192 d13504 u32768
 +  <​7>​[ ​   0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
 +  <​7>​[ ​   0.000000] pcpu-alloc: [0] 0 [0] 1 
 +  <​4>​[ ​   0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 110640
 +  <​5>​[ ​   0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,​0x001F0000 mtdparts=rk29xxnand:​0x00002000@0x00002000(misc),​0x00004000@0x00004000(kernel),​0x00008000@0x00008000(boot),​0x00010000@0x00010000(recovery),​0x00020000@0x00020000(backup),​0x00040000@0x00040000(cache),​0x00200000@0x00080000(userdata),​0x00002000@0x00280000(kpanic),​0x00200000@0x00282000(system),​-@0x00482000(user) bootver=2014-03-03#​2.13 firmware_ver=4.1.1
 +  <​6>​[ ​   0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
 +  <​6>​[ ​   0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
 +  <​6>​[ ​   0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
 +  <​6>​[ ​   0.000000] Memory: 436MB = 436MB total
 +  <​5>​[ ​   0.000000] Memory: 416896k/​416896k available, 107392k reserved, 0K highmem
 +  <​5>​[ ​   0.000000] Virtual kernel memory layout:
 +  <​5>​[ ​   0.000000] ​    ​vector ​ : 0xffff0000 - 0xffff1000 ​  ​( ​  4 kB)
 +  <​5>​[ ​   0.000000] ​    ​fixmap ​ : 0xfff00000 - 0xfffe0000 ​  ( 896 kB)
 +  <​5>​[ ​   0.000000] ​    ​DMA ​    : 0xff600000 - 0xffe00000 ​  ​( ​  8 MB)
 +  <​5>​[ ​   0.000000] ​    ​vmalloc : 0xdf000000 - 0xfe800000 ​  ( 504 MB)
 +  <​5>​[ ​   0.000000] ​    ​lowmem ​ : 0xc0000000 - 0xde800000 ​  ( 488 MB)
 +  <​5>​[ ​   0.000000] ​    ​pkmap ​  : 0xbfe00000 - 0xc0000000 ​  ​( ​  2 MB)
 +  <​5>​[ ​   0.000000] ​    ​modules : 0xbf000000 - 0xbfe00000 ​  ​( ​ 14 MB)
 +  <​5>​[ ​   0.000000] ​      .init : 0xc0408000 - 0xc04ce000 ​  ( 792 kB)
 +  <​5>​[ ​   0.000000] ​      .text : 0xc04ce000 - 0xc0b56a90 ​  (6691 kB)
 +  <​5>​[ ​   0.000000] ​      .data : 0xc0b58000 - 0xc0bcecc8 ​  ( 476 kB)
 +  <​5>​[ ​   0.000000] ​       .bss : 0xc0bd2024 - 0xc1a77d68 ​  ​(15000 kB)
 +  <​6>​[ ​   0.000000] SLUB: Genslabs=13,​ HWalign=32, Order=0-3, MinObjects=0,​ CPUs=2, Nodes=1
 +  <​6>​[ ​   0.000000] Preemptible hierarchical RCU implementation.
 +  <​6>​[ ​   0.000000] NR_IRQS:448
 +  <​4>​[ ​   0.000000] rk30_gpio_init:​ 128 gpio irqs in 4 banks
 +  <​6>​[ ​   0.000000] sched_clock:​ 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
 +  <​6>​[ ​   0.000000] Console: colour dummy device 80x30
 +  <​6>​[ ​   0.005168] Calibrating delay loop (skipped) preset value.. 623.79 BogoMIPS (lpj=3118983)
 +  <​6>​[ ​   0.014295] pid_max: default: 32768 minimum: 301
 +  <​6>​[ ​   0.019945] Mount-cache hash table entries: 512
 +  <​6>​[ ​   0.026320] Initializing cgroup subsys debug
 +  <​6>​[ ​   0.031109] Initializing cgroup subsys cpuacct
 +  <​6>​[ ​   0.036211] Initializing cgroup subsys freezer
 +  <​6>​[ ​   0.041246] CPU: Testing write buffer coherency: ok
 +  <​4>​[ ​   0.147794] CPU1: Booted secondary processor
 +  <​6>​[ ​   0.147891] Brought up 2 CPUs
 +  <​6>​[ ​   0.156027] SMP: Total of 2 processors activated (1247.59 BogoMIPS).
 +  <​6>​[ ​   0.163899] devtmpfs: initialized
 +  <​6>​[ ​   0.183821] NET: Registered protocol family 16
 +  <​6>​[ ​   0.189031] last_log: 0xdad00000 map to 0xdf004000 and copy to 0xc0bd6210 (version 2.1)
 +  <​4>​[ ​   0.220096] DVFS MSG: AVS Value(index=0):​ 145 146 145 145 145 145 145 145 145 144 
 +  <​6>​[ ​   0.239413] lcdc0 is used as primary display device contoller!
 +  <​6>​[ ​   0.245975] warning:​lcdc1 not add to system!
 +  <​6>​[ ​   0.351336] rk29sdk_wifi_bt_gpio_control_init:​ init finished
 +  <​6>​[ ​   0.360247] console [ttyFIQ0] enabled, bootconsole disabled
 +  <​6>​[ ​   0.369512] Registered FIQ tty driver dac8fc00
 +  <​6>​[ ​   0.370596] Loaded driver for PL330 DMAC-1 rk29-pl330
 +  <​6>​[ ​   0.370671] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
 +  <​6>​[ ​   0.370973] Loaded driver for PL330 DMAC-2 rk29-pl330
 +  <​6>​[ ​   0.371042] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
 +  <​6>​[ ​   0.402669] bio: create slab <​bio-0>​ at 0
 +  <​4>​[ ​   0.407125] wm831x_dcdc_init ​
 +  <​4>​[ ​   0.407679] wm831x_ldo_init ​
 +  <​5>​[ ​   0.408555] SCSI subsystem initialized
 +  <​6>​[ ​   0.409049] usbcore: registered new interface driver usbfs
 +  <​6>​[ ​   0.409290] usbcore: registered new interface driver hub
 +  <​6>​[ ​   0.410289] usbcore: registered new device driver usb
 +  <​6>​[ ​   0.411102] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
 +  <​6>​[ ​   0.411797] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
 +  <​6>​[ ​   0.412257] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
 +  <​6>​[ ​   0.412565] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
 +  <​6>​[ ​   0.413010] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
 +  <​6>​[ ​   0.459349] rk30-adc rk30-adc: rk30 adc: driver initialized
 +  <​4>​[ ​   0.633393] protection lower power .....
 +  <​6>​[ ​   0.637398] rk30_adc_battery:​ driver initialized
 +  <​6>​[ ​   0.642682] Advanced Linux Sound Architecture Driver Version 1.0.24.
 +  <​6>​[ ​   0.650117] Bluetooth: Core ver 2.16
 +  <​6>​[ ​   0.653936] NET: Registered protocol family 31
 +  <​6>​[ ​   0.658466] Bluetooth: HCI device and connection manager initialized
 +  <​6>​[ ​   0.664913] Bluetooth: HCI socket layer initialized
 +  <​6>​[ ​   0.669866] Bluetooth: L2CAP socket layer initialized
 +  <​6>​[ ​   0.675028] Bluetooth: SCO socket layer initialized
 +  <​6>​[ ​   0.680457] cfg80211: Calling CRDA to update world regulatory domain
 +  <​4>​[ ​   0.689020] rk fb probe ok!
 +  <​3>​[ ​   0.692450] i2c i2c-1: No ack, Maybe slave(addr: 0x5a) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   0.692826] i2c i2c-1: No ack, Maybe slave(addr: 0x5a) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   0.693185] i2c i2c-1: No ack, Maybe slave(addr: 0x5a) not exist or abnormal power-on, retry 0...
 +  <​4>​[ ​   0.693287] The device is not act8846 ​
 +  <​4>​[ ​   0.693421] i2c-core: driver [act8846] using legacy suspend method
 +  <​4>​[ ​   0.693495] i2c-core: driver [act8846] using legacy resume method
 +  <​4>​[ ​   0.693581] wm831x_i2c_init
 +  <​3>​[ ​   0.694355] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   0.695114] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   0.695863] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   0.695972] wm831x 1-0034: Failed to read parent ID: -11
 +  <​4>​[ ​   0.696056] wm831x: probe of 1-0034 failed with error -11
 +  <​4>​[ ​   0.728508] tps65910_pre_init,​line=20
 +  <​6>​[ ​   0.731476] TPS65910 Set default voltage.
 +  <​4>​[ ​   0.733829] tps65910_pre_init,​line=268
 +  <​4>​[ ​   0.786463] tps65910_post_init,​line=277
 +  <​4>​[ ​   0.786524] tps65910_post_init:​g_pmic_type=2
 +  <​4>​[ ​   0.789216] tps65910_post_init ​ vdd_core =1200000mV end
 +  <​4>​[ ​   0.791948] tps65910_post_init ​ vdd_cpu =1200000mV end
 +  <​4>​[ ​   0.807842] tps65910_post_init ​ vio =3300000mV end
 +  <​4>​[ ​   0.813163] tps65910_post_init,​line=305 END
 +  <​4>​[ ​   0.813229] tps65910_i2c_probe:​irq=171,​irq_base=384,​gpio_base=288
 +  <​6>​[ ​   0.823747] tps65910-rtc tps65910-rtc:​ rtc core: registered tps65910 as rtc0
 +  <​4>​[ ​   0.827069] tps65910_rtc_probe:​ok
 +  <​6>​[ ​   0.827240] Switching to clocksource timer1
 +  <​6>​[ ​   0.827880] Switched to NOHz mode on CPU #1
 +  <​6>​[ ​   0.837066] Switched to NOHz mode on CPU #0
 +  <​4>​[ ​   0.842646] lcdc0:​reg_phy_base = 0x1010c000,​reg_vir_base:​0xdf0ac000
 +  <​4>​[ ​   0.842788] fb0:win0
 +  <​4>​[ ​   0.842800] fb1:win1
 +  <​4>​[ ​   0.842810] fb2:win2
 +  <​4>​[ ​   0.843032] rk3066b lcdc0 clk enable...
 +  <​4>​[ ​   0.868271] rk3066b lcdc0 clk disable...
 +  <​4>​[ ​   0.886861] fb0:​phy:​7bc00000>>​vir:​e0000000>>​len:​0x800000
 +  <​4>​[ ​   0.887439] rk_fb_register>>>>>​fb0
 +  <​4>​[ ​   0.896116] rk_fb_register>>>>>​fb1
 +  <​4>​[ ​   0.896253] rk3066b lcdc0 clk enable...
 +  <​4>​[ ​   0.896332] lcdc0: dclk:​49500000>>​fps:​60 rk3066b_load_screen for lcdc0 ok!
 +  <​6>​[ ​   0.896423] lcdc0 win0 open
 +  <​4>​[ ​   0.920931] rk3066b lcdc0 probe ok!
 +  <​4>​[ ​   0.921211] pwm_regulator_probe:​n_voltages=24
 +  <​6>​[ ​   0.921610] pwm_regulator.0:​ driver initialized
 +  <​4>​[ ​   0.931729] stephen for pwm1 output ****** pwm_regulator_set_voltage:​ok,​vol=1100000,​pwm_value=80
 +  <​3>​[ ​   0.947622] emmc emmc: internal_storage is NOT emmc
 +  <​6>​[ ​   0.948055] NET: Registered protocol family 2
 +  <​6>​[ ​   0.948356] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
 +  <​6>​[ ​   0.949055] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
 +  <​6>​[ ​   0.949765] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
 +  <​6>​[ ​   0.950530] TCP: Hash tables configured (established 16384 bind 16384)
 +  <​6>​[ ​   0.950608] TCP reno registered
 +  <​6>​[ ​   0.950661] UDP hash table entries: 256 (order: 1, 8192 bytes)
 +  <​6>​[ ​   0.950767] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
 +  <​6>​[ ​   0.951477] NET: Registered protocol family 1
 +  <​4>​[ ​   1.057716] RK29 Backlight Driver Initialized.
 +  <​6>​[ ​   1.058213] Unpacking initramfs...
 +  <​6>​[ ​   1.325685] Freeing initrd memory: 1984K
 +  <​6>​[ ​   1.326070] PMU: registered new PMU device of type 0
 +  <​4>​[ ​   1.327198] DVFS WARNING:​ vd_core : selector=86,​but volt <=0
 +  <​4>​[ ​   1.329140] DVFS WARNING:​ vd_cpu : selector=86,​but volt <=0
 +  <​4>​[ ​   1.344567] rk3188 cpufreq version 2.2, suspend freq 312 MHz
 +  <​4>​[ ​   1.347930] highmem bounce pool size: 64 pages
 +  <​6>​[ ​   1.348366] ashmem: initialized
 +  <​6>​[ ​   1.360458] fuse init (API version 7.16)
 +  <​6>​[ ​   1.363526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
 +  <​6>​[ ​   1.363634] io scheduler noop registered
 +  <​6>​[ ​   1.363694] io scheduler deadline registered
 +  <​6>​[ ​   1.363867] io scheduler cfq registered (default)
 +  <​6>​[ ​   1.378203] rga: Driver loaded succesfully
 +  <​4>​[ ​   1.379243] rk_serial.c v1.4 2013-06-21
 +  <​6>​[ ​   1.379918] rk_serial rk_serial.0:​ dma_rx_buffer 0xffdfc000
 +  <​6>​[ ​   1.380004] rk_serial rk_serial.0:​ dma_rx_phy 0x79e6a000
 +  <​6>​[ ​   1.380155] rk_serial rk_serial.0:​ serial_rk_init_dma_rx sucess
 +  <​6>​[ ​   1.380243] rk_serial.0:​ ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
 +  <​6>​[ ​   1.381039] rk_serial rk_serial.0:​ membase 0xdf0bc000
 +  <​6>​[ ​   1.381316] rk_serial.3:​ ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
 +  <​6>​[ ​   1.381950] rk_serial rk_serial.3:​ membase 0xdf0c0000
 +  <​6>​[ ​   1.383078] Rockchip ion module(version:​ 1.0) is successfully loaded
 +  <​6>​[ ​   1.388147] loop: module loaded
 +  <​6>​[ ​   1.388245] Android kernel panic handler initialized (bind=kpanic)
 +  <​6>​[ ​   1.389484] PPP generic driver version 2.4.2
 +  <​6>​[ ​   1.389844] PPP Deflate Compression module registered
 +  <​6>​[ ​   1.389900] PPP BSD Compression module registered
 +  <​6>​[ ​   1.391078] PPP MPPE Compression module registered
 +  <​6>​[ ​   1.391135] NET: Registered protocol family 24
 +  <​6>​[ ​   1.391311] usbcore: registered new interface driver asix
 +  <​6>​[ ​   1.391432] usbcore: registered new interface driver cdc_ether
 +  <​6>​[ ​   1.391545] usbcore: registered new interface driver dm9620
 +  <​6>​[ ​   1.391655] usbcore: registered new interface driver SR9700_android
 +  <​6>​[ ​   1.391780] usbcore: registered new interface driver net1080
 +  <​6>​[ ​   1.391893] usbcore: registered new interface driver cdc_subset
 +  <​6>​[ ​   1.392004] usbcore: registered new interface driver zaurus
 +  <​6>​[ ​   1.392078] cdc_ncm: 04-Aug-2011
 +  <​6>​[ ​   1.392170] usbcore: registered new interface driver cdc_ncm
 +  <​4>​[ ​   1.392226] Rockchip WiFi SYS interface (V1.00) ... 
 +  <​6>​[ ​   1.392332] Initializing USB Mass Storage driver...
 +  <​6>​[ ​   1.392485] usbcore: registered new interface driver usb-storage
 +  <​6>​[ ​   1.392543] USB Mass Storage support registered.
 +  <​6>​[ ​   1.392746] usbcore: registered new interface driver usbserial
 +  <​6>​[ ​   1.392849] USB Serial support registered for generic
 +  <​6>​[ ​   1.392975] usbcore: registered new interface driver usbserial_generic
 +  <​6>​[ ​   1.393037] usbserial: USB Serial Driver core
 +  <​6>​[ ​   1.393126] USB Serial support registered for GSM modem (1-port)
 +  <​6>​[ ​   1.393246] usbcore: registered new interface driver option
 +  <​6>​[ ​   1.393300] option: v0.7.2:USB Driver for GSM modems
 +  <​6>​[ ​   1.607642] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
 +  <​6>​[ ​   1.607692] usb20_otg usb20_otg: DWC OTG Controller
 +  <​6>​[ ​   1.607820] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
 +  <​6>​[ ​   1.607891] usb20_otg usb20_otg: irq 48, io mem 0x00000000
 +  <​6>​[ ​   1.607925] DWC_OTG: dwc_otg_hcd_start controller in device mode,​everest
 +  <​6>​[ ​   1.608003] usb usb1: New USB device found, idVendor=1d6b,​ idProduct=0002
 +  <​6>​[ ​   1.608047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 +  <​6>​[ ​   1.608090] usb usb1: Product: DWC OTG Controller
 +  <​6>​[ ​   1.608119] usb usb1: Manufacturer:​ Linux 3.0.36+ dwc_otg_hcd
 +  <​6>​[ ​   1.608154] usb usb1: SerialNumber:​ usb20_otg
 +  <​6>​[ ​   1.608504] hub 1-0:1.0: USB hub found
 +  <​6>​[ ​   1.608540] hub 1-0:1.0: 1 port detected
 +  <​6>​[ ​   1.611254] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:​0xdf180000
 +  <​6>​[ ​   1.821824] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
 +  <​6>​[ ​   1.821871] usb20_host usb20_host: DWC OTG Controller
 +  <​6>​[ ​   1.821957] usb20_host usb20_host: new USB bus registered, assigned bus number 2
 +  <​6>​[ ​   1.822026] usb20_host usb20_host: irq 49, io mem 0x00000000
 +  <​6>​[ ​   1.822095] DWC_OTG: Init: Port Power? op_state=1
 +  <​6>​[ ​   1.822125] DWC_OTG: Init: Power Port (0)
 +  <​6>​[ ​   1.822188] usb usb2: New USB device found, idVendor=1d6b,​ idProduct=0002
 +  <​6>​[ ​   1.822232] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 +  <​6>​[ ​   1.822275] usb usb2: Product: DWC OTG Controller
 +  <​6>​[ ​   1.822304] usb usb2: Manufacturer:​ Linux 3.0.36+ host20_hcd
 +  <​6>​[ ​   1.822339] usb usb2: SerialNumber:​ usb20_host
 +  <​6>​[ ​   1.822687] hub 2-0:1.0: USB hub found
 +  <​6>​[ ​   1.822723] hub 2-0:1.0: 1 port detected
 +  <​6>​[ ​   1.824072] android_usb gadget: Mass Storage Function, version: 2009/09/11
 +  <​6>​[ ​   1.824119] android_usb gadget: Number of LUNs=2
 +  <​6>​[ ​   1.824150] ​ lun0: LUN: removable file: (no medium)
 +  <​6>​[ ​   1.824181] ​ lun1: LUN: removable file: (no medium)
 +  <​6>​[ ​   1.824436] android_usb gadget: android_usb ready
 +  <​6>​[ ​   1.824657] input: rk29-keypad as /​devices/​platform/​rk29-keypad/​input/​input0
 +  <​6>​[ ​   1.824969] usbcore: registered new interface driver xpad
 +  <​6>​[ ​   1.825042] usbcore: registered new interface driver usb_acecad
 +  <​6>​[ ​   1.825077] acecad: v3.2:USB Acecad Flair tablet driver
 +  <​6>​[ ​   1.825136] usbcore: registered new interface driver aiptek
 +  <​6>​[ ​   1.825170] aiptek: v2.3 (May 2, 2007):​Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
 +  <​6>​[ ​   1.825214] aiptek: Bryan W. Headley/​Chris Atenasio/​Cedric Brun/Rene van Paassen
 +  <​6>​[ ​   1.825281] usbcore: registered new interface driver gtco
 +  <​4>​[ ​   1.825314] GTCO usb driver version: 2.00.0006
 +  <​6>​[ ​   1.825365] usbcore: registered new interface driver hanwang
 +  <​6>​[ ​   1.825426] usbcore: registered new interface driver kbtab
 +  <​6>​[ ​   1.825459] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
 +  <​6>​[ ​   1.825543] usbcore: registered new interface driver wacom
 +  <​6>​[ ​   1.825577] wacom: v1.52:USB Wacom tablet driver
 +  <​4>​[ ​   1.825604] ==gsl_ts_init==
 +  <​4>​[ ​   1.825645] GSLX680 Enter gsl_ts_probe
 +  <​4>​[ ​   1.825669] ==kzalloc success=
 +  <​4>​[ ​   2.147434] [GSLX680] Enter gsl_ts_init_ts
 +  <​6>​[ ​   2.148120] input: gslX680 as /​devices/​platform/​rk30_i2c.2/​i2c-2/​2-0040/​input/​input1
 +  <​4>​[ ​   2.377408] =============gsl_load_fw start==============
 +  <​4>​[ ​   3.133564] =============gsl_load_fw end==============
 +  <​4>​[ ​   3.358270] [GSLX680] End gsl_ts_probe
 +  <​4>​[ ​   3.358440] ret=0
 +  <​4>​[ ​   3.359032] sensor_register_slave:​mma7660,​id=18
 +  <​4>​[ ​   3.359097] sensor_register_slave:​mxc6225,​id=20
 +  <​6>​[ ​   3.359730] using rtc device, tps65910, for alarms
 +  <​6>​[ ​   3.360222] i2c /dev entries driver
 +  <​6>​[ ​   3.361999] lirc_dev: IR Remote Control driver registered, major 250 
 +  <​6>​[ ​   3.362082] IR NEC protocol handler initialized
 +  <​6>​[ ​   3.362139] IR RC5(x) protocol handler initialized
 +  <​6>​[ ​   3.362197] IR RC6 protocol handler initialized
 +  <​6>​[ ​   3.362252] IR JVC protocol handler initialized
 +  <​6>​[ ​   3.362307] IR Sony protocol handler initialized
 +  <​6>​[ ​   3.362361] IR RC5 (streamzap) protocol handler initialized
 +  <​6>​[ ​   3.362426] IR LIRC bridge handler initialized
 +  <​6>​[ ​   3.362479] Linux video capture interface: v2.00
 +  <​4>​[ ​   3.363251] def_ref_volt:​ 1800mV, curr_ref_volt:​ 1800mV
 +  <​4>​[ ​   3.363319] start_charge_logo_display
 +  <​6>​[ ​   3.364395] device-mapper:​ uevent: version 1.0.3
 +  <​6>​[ ​   3.365194] device-mapper:​ ioctl: 4.20.0-ioctl (2011-02-02) initialised:​ dm-devel@redhat.com
 +  <​6>​[ ​   3.365624] Bluetooth: HCI UART driver ver 2.2
 +  <​6>​[ ​   3.365690] Bluetooth: HCI H4 protocol initialized
 +  <​6>​[ ​   3.365751] Bluetooth: HCILL protocol initialized
 +  <​6>​[ ​   3.365902] cpuidle: using governor ladder
 +  <​6>​[ ​   3.365959] cpuidle: using governor menu
 +  <​6>​[ ​   3.411861] .Line3976..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. ​ [sd_mmc]
 +  <​6>​[ ​   3.412117] .Line3976..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. ​ [sdio]
 +  <​6>​[ ​   3.414053] usbcore: registered new interface driver usbhid
 +  <​6>​[ ​   3.414097] usbhid: USB HID core driver
 +  <​6>​[ ​   3.414590] logger: created 256K log '​log_main'​
 +  <​6>​[ ​   3.414744] logger: created 256K log '​log_events'​
 +  <​6>​[ ​   3.414878] logger: created 256K log '​log_radio'​
 +  <​6>​[ ​   3.415004] logger: created 256K log '​log_system'​
 +  <​6>​[ ​   3.415696] ​
 +  <​6>​[ ​   3.415701] drivers/​mmc/​core/​core.c...2015.. ​ ===== mmc_rescan Begin....[mmc0]
 +  <​4>​[ ​   3.415767] ​
 +  <​4>​[ ​   3.415771] =================
 +  <​4>​[ ​   3.415778] sdmmc_rescan..2022.. ​ ====find no SDMMC host. [mmc0]
 +  <​6>​[ ​   3.415872] ​
 +  <​6>​[ ​   3.415876] drivers/​mmc/​core/​core.c...2015.. ​ ===== mmc_rescan Begin....[mmc1]
 +  <​4>​[ ​   3.415958] es8323 probe i2c recv ok
 +  <​4>​[ ​   3.416139] i2c-core: driver [ES8323] using legacy suspend method
 +  <​4>​[ ​   3.416185] i2c-core: driver [ES8323] using legacy resume method
 +  <​6>​[ ​   3.416469] ES8323 audio_card_init
 +  <​6>​[ ​   3.416498] XXXXEnter::​audio_card_init----215
 +  <​4>​[ ​   3.416738] es8323_probe
 +  <​6>​[ ​   3.427410] rk29_sdmmc_change_clk_div..1706.. ​ newDiv=40, newCLK=300Khz [sdio]
 +  <​4>​[ ​   4.068055] ES8323 4-0010: asoc: no dapm match for LINPUT1 --> NULL --> Left Line Mux
 +  <​3>​[ ​   4.068168] ES8323 4-0010: Failed to add route LINPUT1->​Left Line Mux
 +  <​4>​[ ​   4.078140] es8323_probe:​register ISR (irq=173)
 +  <​4>​[ ​   4.078189] probe,​hp_det = 1,deinsert hp
 +  <​6>​[ ​   4.078237] Enter::​rk29_es8323_init----142
 +  <​6>​[ ​   4.090292] asoc: ES8323 HiFi <-> rk29_i2s.1 mapping ok
 +  <​6>​[ ​   4.090855] ALSA device list:
 +  <​6>​[ ​   4.090885] ​  #0: RK29_ES8323
 +  <​6>​[ ​   4.091015] GACT probability NOT on
 +  <​6>​[ ​   4.091050] Mirror/​redirect action on
 +  <​6>​[ ​   4.091080] u32 classifier
 +  <​6>​[ ​   4.091102] ​    ​Actions configured
 +  <​6>​[ ​   4.091131] Netfilter messages via NETLINK v0.30.
 +  <​6>​[ ​   4.091213] nf_conntrack version 0.5.0 (6545 buckets, 26180 max)
 +  <​6>​[ ​   4.091615] ctnetlink v0.93: registering with nfnetlink.
 +  <​6>​[ ​   4.091692] NF_TPROXY: Transparent proxy support initialized,​ version 4.1.0
 +  <​6>​[ ​   4.091743] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
 +  <​6>​[ ​   4.092203] xt_time: kernel timezone is -0000
 +  <​6>​[ ​   4.092403] ip_tables: (C) 2000-2006 Netfilter Core Team
 +  <​6>​[ ​   4.092603] arp_tables: (C) 2002 David S. Miller
 +  <​6>​[ ​   4.092691] TCP cubic registered
 +  <​6>​[ ​   4.092718] Initializing XFRM netlink socket
 +  <​6>​[ ​   4.093345] NET: Registered protocol family 10
 +  <​6>​[ ​   4.094183] Mobile IPv6
 +  <​6>​[ ​   4.094243] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +  <​6>​[ ​   4.094445] IPv6 over IPv4 tunneling driver
 +  <​6>​[ ​   4.095350] NET: Registered protocol family 17
 +  <​6>​[ ​   4.095422] NET: Registered protocol family 15
 +  <​6>​[ ​   4.099945] Bluetooth: RFCOMM TTY layer initialized
 +  <​6>​[ ​   4.100001] Bluetooth: RFCOMM socket layer initialized
 +  <​6>​[ ​   4.100040] Bluetooth: RFCOMM ver 1.11
 +  <​6>​[ ​   4.100070] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 +  <​6>​[ ​   4.100110] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 +  <​6>​[ ​   4.100303] NET: Registered protocol family 35
 +  <​4>​[ ​   4.100745] ​
 +  <​4>​[ ​   4.100751] *****************sensor_mod_init..sp0838.. ​
 +  <​6>​[ ​   4.101016] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
 +  <​5>​[ ​   4.101110] Registering SWP/SWPB emulation handler
 +  <​3>​[ ​   4.107474] rk_cam_cif(3162):​rk3066b-camera version: v0.3.15 ​ Zoom by ippget cif ldo failed!
 +  <​4>​[ ​   4.182476] DDR DEBUG: training 378Mhz[0]:​0x3db00009-0x3db00009-0x3db00009-0x3db00009
 +  <​6>​[ ​   4.182531] ddrfreq: get datatraing from 378Mhz to 378Mhz
 +  <​6>​[ ​   4.182733] ddrfreq: verion 3.2 20130917
 +  <​6>​[ ​   4.182761] ddrfreq: fix cpu pause bug
 +  <​6>​[ ​   4.182791] ddrfreq: normal 378MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 300MHz
 +  <​4>​[ ​   4.187012] regulator_init_complete:​ VPLL: incomplete constraints,​ leaving on
 +  <​6>​[ ​   4.187151] i2c i2c-0: sensor_probe:​ gs_mma7660,​0xdadb0600
 +  <​4>​[ ​   4.187188] sensor_chip_init:​gs_mma7660:​devid=0x0,​ops=0xc0bab888
 +  <​3>​[ ​   4.197364] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 2...
 +  <​4>​[ ​   4.197525] get cif ldo failed!
 +  <​3>​[ ​   4.197652] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   4.197936] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   4.198164] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   4.198389] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   4.198614] i2c i2c-0: No ack, Maybe slave(addr: 0x4c) not exist or abnormal power-on, retry 0...
 +  <​4>​[ ​   4.198664] sensor_active:​fail to active sensor
 +  <​4>​[ ​   4.198692] sensor_init:​line=110,​error
 +  <​4>​[ ​   4.198714] sensor_initial:​fail to init sensor
 +  <​4>​[ ​   4.198740] sensor_chip_init:​fail to init sensor
 +  <​3>​[ ​   4.198770] i2c i2c-0: sensor_probe failed -11
 +  <​3>​[ ​   4.198777] ​
 +  <​4>​[ ​   4.198813] sensors: probe of 0-004c failed with error -11
 +  <​6>​[ ​   4.198867] i2c i2c-0: sensor_probe:​ gs_mxc6225,​0xdadb0800
 +  <​4>​[ ​   4.198903] sensor_chip_init:​gs_mxc6225:​devid=0x0,​ops=0xc0bab8e4
 +  <​6>​[ ​   4.199860] input: gsensor as /​devices/​platform/​rk30_i2c.0/​i2c-0/​0-0015/​input/​input2
 +  <​4>​[ ​   4.200036] sensor_irq_init:​use polling,​delay=30 ms
 +  <​4>​[ ​   4.200184] sensor_misc_device_register:​miscdevice:​ mma8452_daemon
 +  <​4>​[ ​   4.200225] sensor_probe:​initialized ok,sensor name:​mxc6225,​type:​2,​id=20
 +  <​4>​[ ​   4.200235] ​
 +  <​6>​[ ​   4.200313] sensor_init:​ Probe name sensors
 +  <​4>​[ ​   4.200355] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
 +  <​6>​[ ​   4.203559] tps65910-rtc tps65910-rtc:​ setting system clock to 2000-01-01 01:43:04 UTC (946690984)
 +  <​6>​[ ​   4.203943] Freeing init memory: 792K
 +  <​4>​[ ​   4.224382] init (1): /​proc/​1/​oom_adj is deprecated, please use /​proc/​1/​oom_score_adj instead.
 +  <​4>​[ ​   4.266731] min_w = 800,min_h = 600 ,max_real_w = 1600,​max_real_h = 1200,max_w = 1600,max_h =1200
 +  <​6>​[ ​   4.276278] keychord: using input dev rk29-keypad for fevent
 +  <​3>​[ ​   4.276478] init: cannot open '/​initlogo.rle'​
 +  <​4>​[ ​   4.317466] get cif ldo failed!
 +  <​3>​[ ​   4.348772] rk30xxnand_ko:​ version magic '​3.0.8+ SMP preempt mod_unload ARMv7 ' should be '​3.0.36+ SMP preempt mod_unload ARMv7 '
 +  <​4>​[ ​   4.357476] Probe gc2035_back_3 success
 +  <​4>​[ ​   4.359102] gp_rknand_info = : 0xdae5f700
 +  <​4>​[ ​   4.359187] rk30_chip_set:​1 ​
 +  <​4>​[ ​   4.359265] FtlInit!
 +  <​4>​[ ​   4.359299] No.1 FLASH ID:ad de 94 eb 74 44
 +  <​4>​[ ​   4.363391] FTL version: 5.0.12 20140214
 +  <​4>​[ ​   4.377374] get cif ldo failed!
 +  <​4>​[ ​   4.415285] get cif ldo failed!
 +  <​4>​[ ​   4.477577] min_w = 640,min_h = 480 ,max_real_w = 640,​max_real_h = 480,max_w = 640,max_h =480
 +  <​3>​[ ​   4.497783] i2c i2c-3: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   4.498248] i2c i2c-3: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   4.498711] i2c i2c-3: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   4.498759] gc0308_back_4(rk_cam_sensor:​320):​ read reg(0x0 val:0x0) failed, try to read again!
 +  <​3>​[ ​   4.498814] gc0308_back_4(rk_cam_sensor:​679):​ read chip id failed
 +  <​4>​[ ​   4.517407] get cif ldo failed!
 +  <​3>​[ ​   4.557379] camera 33-1-gc0308_back_4:​ Probe gc0308_back_4 failed
 +  <​4>​[ ​   4.566782] gBootMedia = 1 gSdmmcFwPartOffset =0!
 +  <​4>​[ ​   4.566812] rknand_buffer.c version: 4.40 20130830!
 +  <​5>​[ ​   4.567003] 10 cmdlinepart partitions found on MTD device rk29xxnand
 +  <​5>​[ ​   4.567039] Creating 10 MTD partitions on "​rk29xxnand":​
 +  <​5>​[ ​   4.567071] 0x000000400000-0x000000800000 : "​misc"​
 +  <​5>​[ ​   4.567937] 0x000000800000-0x000001000000 : "​kernel"​
 +  <​5>​[ ​   4.568606] 0x000001000000-0x000002000000 : "​boot"​
 +  <​5>​[ ​   4.569186] 0x000002000000-0x000004000000 : "​recovery"​
 +  <​5>​[ ​   4.569774] 0x000004000000-0x000008000000 : "​backup"​
 +  <​5>​[ ​   4.570415] 0x000008000000-0x000010000000 : "​cache"​
 +  <​5>​[ ​   4.571104] 0x000010000000-0x000050000000 : "​userdata"​
 +  <​5>​[ ​   4.572471] 0x000050000000-0x000050400000 : "​kpanic"​
 +  <​6>​[ ​   4.574364] apanic: Bound to mtd partition '​kpanic'​
 +  <​6>​[ ​   4.574394] apanic: No panic data available
 +  <​5>​[ ​   4.574436] 0x000050400000-0x000090400000 : "​system"​
 +  <​5>​[ ​   4.575824] 0x000090400000-0x0001d4000000 : "​user"​
 +  <​4>​[ ​   4.580068] get cif ldo failed!
 +  <​4>​[ ​   4.610004] get cif ldo failed!
 +  <​4>​[ ​   4.647716] min_w = 640,min_h = 480 ,max_real_w = 640,​max_real_h = 480,max_w = 640,max_h =480
 +  <​3>​[ ​   4.668140] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   4.668505] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   4.669031] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   4.669081] gc0329_back_5(rk_cam_sensor:​154):​ write reg(0xfc, val:0x16) failed, try to write again!
 +  <​3>​[ ​   4.669653] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   4.670017] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   4.670543] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   4.670592] gc0329_back_5(rk_cam_sensor:​154):​ write reg(0xfc, val:0x16) failed, try to write again!
 +  <​3>​[ ​   4.671160] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   4.671524] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   4.672526] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   4.672577] gc0329_back_5(rk_cam_sensor:​154):​ write reg(0xfc, val:0x16) failed, try to write again!
 +  <​3>​[ ​   4.698294] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   4.699185] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   4.699775] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   4.699825] gc0329_back_5(rk_cam_sensor:​320):​ read reg(0x0 val:0x0) failed, try to read again!
 +  <​3>​[ ​   4.699880] gc0329(917):​ gc0329 read chip id high byte failed
 +  <​3>​[ ​   4.699888] ​
 +  <​3>​[ ​   4.699920] gc0329(924):​ error: gc0329 mismatched ​  pid = 0x0
 +  <​3>​[ ​   4.699927] ​
 +  <​3>​[ ​   4.699962] gc0329_back_5(rk_cam_sensor:​698):​ error: mismatched ​  pid = 0x0
 +  <​3>​[ ​   4.699971] ​
 +  <​6>​[ ​   4.716602] EXT4-fs (mtdblock8):​ mounted filesystem with ordered data mode. Opts: discard
 +  <​4>​[ ​   4.717492] get cif ldo failed!
 +  <​3>​[ ​   4.756072] camera 33-2-gc0329_back_5:​ Probe gc0329_back_5 failed
 +  <​4>​[ ​   4.768027] get cif ldo failed!
 +  <​4>​[ ​   4.824635] get cif ldo failed!
 +  <​3>​[ ​   4.859480] i2c i2c-3: 1 i2c clients have been registered at 0x3cget cif ldo failed!
 +  <​3>​[ ​   4.907421] camera 33-3-ov5640_back_6:​ Probe ov5640_back_6 failed
 +  <​4>​[ ​   4.927381] get cif ldo failed!
 +  <​6>​[ ​   4.952317] EXT4-fs (mtdblock6):​ mounted filesystem with ordered data mode. Opts: discard
 +  <​4>​[ ​   4.965587] get cif ldo failed!
 +  <​6>​[ ​   5.003703] EXT4-fs (mtdblock5):​ mounted filesystem with ordered data mode. Opts: discard
 +  <​4>​[ ​   5.008337] min_w = 800,min_h = 600 ,max_real_w = 1600,​max_real_h = 1200,max_w = 1600,max_h =1200
 +  <​3>​[ ​   5.027845] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   5.028318] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   5.028784] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   5.028832] sp2518_back_7(rk_cam_sensor:​320):​ read reg(0x2 val:0x0) failed, try to read again!
 +  <​3>​[ ​   5.028889] sp2518_back_7(rk_cam_sensor:​679):​ read chip id failed
 +  <​4>​[ ​   5.047416] get cif ldo failed!
 +  <​3>​[ ​   5.077388] camera 33-4-sp2518_back_7:​ Probe sp2518_back_7 failed
 +  <​4>​[ ​   5.097364] get cif ldo failed!
 +  <​3>​[ ​   5.110334] init: /​sbin/​e2fsck terminated by exit(8)
 +  <​3>​[ ​   5.110375] init: Operational error while checking volume '/​dev/​block/​mtdblock8'​
 +  <​3>​[ ​   5.110521] init: Failed to mount /​dev/​block/​mtdblock8,​ system didnot mount and will cause Android Error!!!
 +  <​4>​[ ​   5.127525] get cif ldo failed!
 +  <​3>​[ ​   5.129783] init: /​sbin/​e2fsck terminated by exit(8)
 +  <​3>​[ ​   5.129819] init: Operational error while checking volume '/​dev/​block/​mtdblock6'​
 +  <​3>​[ ​   5.129955] init: Failed to mount /​dev/​block/​mtdblock6,​ format it to ext4 now
 +  <​3>​[ ​   5.156155] init: /​sbin/​e2fsck terminated by exit(8)
 +  <​3>​[ ​   5.157917] init: Operational error while checking volume '/​dev/​block/​mtdblock5'​
 +  <​3>​[ ​   5.158060] init: Failed to mount /​dev/​block/​mtdblock5,​ format it to ext4 now
 +  <​4>​[ ​   5.168780] ​
 +  <​4>​[ ​   5.168784] sensor_probe..drivers/​media/​video/​sp0838.c..2791..
 +  <​4>​[ ​   5.168830] sp0838 sensor_ioctrl ​ cmd(2) on(0)
 +  <​4>​[ ​   5.174355] rk30_mirroring:​ Unknown symbol video_data_to_mirroring (err 0)
 +  <​4>​[ ​   5.174429] rk30_mirroring:​ Unknown symbol audio_data_to_mirroring (err 0)
 +  <​3>​[ ​   5.177584] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   5.179257] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   5.180554] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   5.180604] ​
 +  <​3>​[ ​   5.180607] ​ sp0838 read reg(0x2 val:0x0) failed, try to read again! ​
 +  <​3>​[ ​   5.180658] sp0838 read chip id high byte failed
 +  <​4>​[ ​   5.180686] ​
 +  <​4>​[ ​   5.180688] sensor_probe..drivers/​media/​video/​sp0838.c..2831 ​ ret = ffffffed ​
 +  <​4>​[ ​   5.182075] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
 +  <​4>​[ ​   5.197399] get cif ldo failed!
 +  <​3>​[ ​   5.227431] camera 33-5-sp0838_back_8:​ Probe sp0838_back_8 failed
 +  <​4>​[ ​   5.247380] get cif ldo failed!
 +  <​4>​[ ​   5.277401] get cif ldo failed!
 +  <​4>​[ ​   5.317710] min_w = 640,min_h = 480 ,max_real_w = 640,​max_real_h = 480,max_w = 640,max_h =480
 +  <​4>​[ ​   5.357366] get cif ldo failed!
 +  <​4>​[ ​   5.387546] Probe gc0308_front_9 success
 +  <​4>​[ ​   5.407403] get cif ldo failed!
 +  <​4>​[ ​   5.437443] get cif ldo failed!
 +  <​4>​[ ​   5.478308] min_w = 640,min_h = 480 ,max_real_w = 640,​max_real_h = 480,max_w = 640,max_h =480
 +  <​3>​[ ​   5.497777] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   5.498255] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   5.498718] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   5.498830] gc0329_front_10(rk_cam_sensor:​154):​ write reg(0xfc, val:0x16) failed, try to write again!
 +  <​3>​[ ​   5.499305] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   5.499764] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   5.500221] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   5.500330] gc0329_front_10(rk_cam_sensor:​154):​ write reg(0xfc, val:0x16) failed, try to write again!
 +  <​3>​[ ​   5.500803] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   5.501262] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   5.501719] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   5.501828] gc0329_front_10(rk_cam_sensor:​154):​ write reg(0xfc, val:0x16) failed, try to write again!
 +  <​3>​[ ​   5.527861] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   5.528383] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   5.528901] i2c i2c-3: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   5.528983] gc0329_front_10(rk_cam_sensor:​320):​ read reg(0x0 val:0x0) failed, try to read again!
 +  <​3>​[ ​   5.529069] gc0329(917):​ gc0329 read chip id high byte failed
 +  <​3>​[ ​   5.529084] ​
 +  <​3>​[ ​   5.529137] gc0329(924):​ error: gc0329 mismatched ​  pid = 0x0
 +  <​3>​[ ​   5.529152] ​
 +  <​3>​[ ​   5.529205] gc0329_front_10(rk_cam_sensor:​698):​ error: mismatched ​  pid = 0x0
 +  <​3>​[ ​   5.529223] ​
 +  <​4>​[ ​   5.547415] get cif ldo failed!
 +  <​3>​[ ​   5.577496] camera 33-7-gc0329_front_10:​ Probe gc0329_front_10 failed
 +  <​4>​[ ​   5.597415] get cif ldo failed!
 +  <​4>​[ ​   5.627475] get cif ldo failed!
 +  <​4>​[ ​   5.667650] ​
 +  <​4>​[ ​   5.667654] sensor_probe..drivers/​media/​video/​sp0838.c..2791..
 +  <​4>​[ ​   5.667699] sp0838 sensor_ioctrl ​ cmd(2) on(0)
 +  <​3>​[ ​   5.670165] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2...
 +  <​3>​[ ​   5.670635] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1...
 +  <​3>​[ ​   5.671103] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0...
 +  <​3>​[ ​   5.671150] ​
 +  <​3>​[ ​   5.671153] ​ sp0838 read reg(0x2 val:0x0) failed, try to read again! ​
 +  <​3>​[ ​   5.671201] sp0838 read chip id high byte failed
 +  <​4>​[ ​   5.671228] ​
 +  <​4>​[ ​   5.671231] sensor_probe..drivers/​media/​video/​sp0838.c..2831 ​ ret = ffffffed ​
 +  <​4>​[ ​   5.687370] get cif ldo failed!
 +  <​3>​[ ​   5.717455] camera 33-8-sp0838_front_11:​ Probe sp0838_front_11 failed
 +  <​4>​[ ​   5.717567] ipp irq 47
 +  <​4>​[ ​   5.717815] IPP init, version rk30-ipp 1.003
 +  <​3>​[ ​   5.837898] init: cannot find '/​system/​etc/​install-recovery.sh',​ disabling '​flash_recovery'​
 +  <​3>​[ ​   5.849425] init: cannot find '/​system/​bin/​copyfile.sh',​ disabling '​copyfile'​
 +  <​3>​[ ​   5.855025] init: cannot find '/​system/​bin/​bplus_helper',​ disabling '​bplus_helper'​
 +  <​4>​[ ​   5.861070] vpu: power on
 +  <​6>​[ ​   5.861147] VPU_SERVICE:​ checking hw id 8270
 +  <​4>​[ ​   5.869609] vpu: power off...done
 +  <​6>​[ ​   5.869667] VPU_SERVICE:​ init success
 +  <​6>​[ ​   5.992832] rk_serial rk_serial.0:​ serial_rk_startup:​ line:0
 +  <​6>​[ ​   5.992946] rk_serial rk_serial.0:​ +serial_rk_set_termios ​ line:0
 +  <​6>​[ ​   5.993037] rk_serial rk_serial.0:​ uartclk:​3225600
 +  <​6>​[ ​   5.993084] rk_serial rk_serial.0:​ baud:9600
 +  <​6>​[ ​   5.993126] rk_serial rk_serial.0:​ quot:21
 +  <​6>​[ ​   5.993665] rk_serial rk_serial.0:​ serial_rk_startup:​ line:0
 +  <​6>​[ ​   5.993755] rk_serial rk_serial.0:​ +serial_rk_set_termios ​ line:0
 +  <​6>​[ ​   5.993814] rk_serial rk_serial.0:​ uartclk:​3225600
 +  <​6>​[ ​   5.993860] rk_serial rk_serial.0:​ baud:9600
 +  <​6>​[ ​   5.993901] rk_serial rk_serial.0:​ quot:21
 +  <​6>​[ ​   5.993952] rk_serial rk_serial.0:​ serial_rk_init_dma_rx sucess
 +  <​3>​[ ​   5.995181] init: property '​ro.serialno'​ doesn'​t exist while expanding '​${ro.serialno}'​
 +  <​3>​[ ​   5.995272] init: cannot expand '​${ro.serialno}'​ while writing to '/​sys/​class/​android_usb/​android0/​iSerial'​
 +  <​3>​[ ​   5.995900] init: using deprecated syntax for specifying property '​ro.product.usbfactory',​ use ${name} instead
 +  <​3>​[ ​   6.181893] android_usb:​ already disabled
 +  <​4>​[ ​   6.273903] RKNAND_GET_SN_SECTOR
 +  <​4>​[ ​   6.277247] return ret = 0
 +  <​4>​[ ​   6.281870] RKNAND_GET_DRM_KEY
 +  <​4>​[ ​   6.283650] return ret = 0
 +  <​4>​[ ​   6.315357] PVR_K: sys.gpvr.version=1.10
 +  <​6>​[ ​   6.338654] .204.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
 +  <​6>​[ ​   6.338713] .235.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
 +  <​6>​[ ​   6.997900] rk3066b_lcdc_blank>>>>>​0
 +  <​6>​[ ​   7.001733] rk3066b_lcdc_blank>>>>>​0
 +  <​4>​[ ​   7.012772] rk fb use 3 buffers
 +  <​6>​[ ​   7.018989] rk3066b_lcdc_blank>>>>>​0
 +  <​4>​[ ​   7.137416] get cif ldo failed!
 +  <​4>​[ ​   7.169091] get cif ldo failed!
 +  <​6>​[ ​   7.174104] rk3066b_lcdc_blank>>>>>​0
 +  <​3>​[ ​   7.217427] gc2035_back_3(rk_cam_sensor:​1162):​ generic_sensor_ioctl cmd(0x3) is unknown !
 +  <​3>​[ ​   7.217443] ​
 +  <​4>​[ ​   7.507387] get cif ldo failed!
 +  <​4>​[ ​   7.557402] get cif ldo failed!
 +  <​4>​[ ​   7.589326] get cif ldo failed!
 +  <​3>​[ ​   7.627428] gc0308_front_9(rk_cam_sensor:​1162):​ generic_sensor_ioctl cmd(0x3) is unknown !
 +  <​3>​[ ​   7.627441] ​
 +  <​3>​[ ​   7.637272] gc0308_front_9(rk_cam_sensor:​500):​ have not other series meet the requirement except init_serie,​array_index = 0
 +  <​3>​[ ​   7.770267] gc0308_front_9(rk_cam_sensor:​500):​ have not other series meet the requirement except init_serie,​array_index = 0
 +  <​3>​[ ​   7.770379] gc0308_front_9(rk_cam_sensor:​500):​ have not other series meet the requirement except init_serie,​array_index = 0
 +  <​3>​[ ​   7.770492] gc0308_front_9(rk_cam_sensor:​500):​ have not other series meet the requirement except init_serie,​array_index = 0
 +  <​3>​[ ​   7.770569] gc0308_front_9(rk_cam_sensor:​500):​ have not other series meet the requirement except init_serie,​array_index = 0
 +  <​3>​[ ​   7.770643] gc0308_front_9(rk_cam_sensor:​500):​ have not other series meet the requirement except init_serie,​array_index = 0
 +  <​4>​[ ​   7.787395] get cif ldo failed!
 +  <​3>​[ ​   7.839064] gc2035_back_3(rk_cam_sensor:​1162):​ generic_sensor_ioctl cmd(0x3) is unknown !
 +  <​3>​[ ​   7.839075] ​
 +  <​3>​[ ​   7.845042] gc0308_front_9(rk_cam_sensor:​1162):​ generic_sensor_ioctl cmd(0x3) is unknown !
 +  <​3>​[ ​   7.845054] ​
 +  <​6>​[ ​   9.848166] DWC_OTG: dwc_otg_hcd_enable,​ disable host controller
 +  <​6>​[ ​  ​12.440081] warning: `zygote'​ uses 32-bit capabilities (legacy support in use)
 +  <​4>​[ ​  ​16.157390] not_reboot_chargeing,​new=78,​old=78,​bat_capacity=78
 +  <​4>​[ ​  ​16.163277] old_capacity = 78 , new_capacity =78, bat->​bat_capacity=78,​bat ->​bat_status=1
 +
  
projects/aqipad.txt · Last modified: 2019/01/28 00:07 by q3k