The proposal is to build a slewing wall-mounted jib crane on a column near the Bridgeport milling machine.
Crane will be used for lifting parts, accessories and material on and off milling machine and the metal lathe.
Requirements:

• Jib length - 3m (to reach the lathe. Can't be much longer than that to be able to clear the opposite wall)
• Lifting capacity - 50 kg near the tip, 150 kg at the column (main uses near the tip would be lathe chucks, crosslide attachements and the lathe tailstock; near the column - milling vise, dividing head and the rotary table)
• Ability to slew around the column to cover 180° of area

The crane consists of:

• top and bottom mounting plates which attach the crane to the brick column and provide bearing housing
• main crane body which consists of a metal column, a jib attached to it and a supporting brace
• trolley which rides along the jib
• electric winch which attaches to the trolley and does the lifting

Materials aquired:

• I-beam(dwuteownik) (Height=100mm Lenght=3m) - for the jib
• Pipe (D=108mm Length=3m) - for the column
• Flat bar (płaskownik) 50x5mm Lenght=6m - for the brace
• Plate (Thickness=10mm) - for mounting plates
• Bottom bearings - (32008 AX KLF-ZVL 40x68x19)
• Top bearings - from the ventilation unit