Differences

This shows you the differences between two versions of the page.

--- infra:tools:voron [2025/08/04 17:58] – [Problems/Things to fix] gro
+++ infra:tools:voron [2026/08/08 21:38] (current) – ar
@@ Line 1: / Line 1: @@
 ====== Voron ======
+| Class | Tool |
+| Function | 3d printer |
+| Model | [[https://vorondesign.com/voron2.4|Voron 2.4 350]] |
+| Hostname/web interface | http://voron.waw.hackerspace.pl/ |
+| Currently installed hotend+nozzle | 0.4mm |
 ===== Status =====
@@ Line 13: / Line 20: @@
 ===== Info =====
-donated by [[people:drozdziak1:start|drozdziak]] , mostly assembled by [[people:noisersup:start|noisersup]], trying to be fixed by [[people:gro:start|gro]]
+donated by [[people:drozdziak1:start|drozdziak]] , mostly assembled by [[people:noisersup:start|noisersup]], trying to be fixed by [[people:gro:start|gro]], annoyed [[people:ar:start|ari]] enough to fix the remaining issues.
 How to use..... good question
@@ Line 43: / Line 50: @@
 | ::: | 0.6mm |   |   |
 | ::: | 0.8mm |   |   |
-| PET-G | 0.4mm | 225 C  | 19 mm3/s  |
+| PET-G | 0.4mm | 255 C  | 19 mm3/s  |
 | ::: | 0.6mm |   |   |
 | ::: | 0.8mm |   |   |
-| ABS/ASA | 0.4mm |   |   |
+| ABS/ASA | 0.4mm | 260 C  | 17 mm3/s  |
 | ::: | 0.6mm |   |   |
 | ::: | 0.8mm |   |   |
 ===== Calibration =====
@@ Line 83: / Line 89: @@
 | 🔲  | Extruder as mix of afterburner/stealthburner  | 27.11.2024 |   |   |
 | ✅  | Trim doors to fits frame  | 26.06.2025 | 4.08.2025  | noiser done it  |
-| 🔲  | Connect back filter fan  | 26.06.2025 |   |   |
+| ✅  | Connect back filter fan  | 26.06.2025 | 4.08.2025  |   |
 | 🔲  | Cable management  | 26.06.2025 |   |   |
 | ✅  | Connect back display  | 26.06.2025 | 17.07.2025  |   |
@@ Line 89: / Line 95: @@
 | ✅  | Assemble broken parts  | 03.07.2025 | 6.07.2025  | Lower chamber fully assembled  |
 | ✅  | Fix speeds  | 03.07.2025 | 11.06.2025  | it's fine |
-| 🔲  | Mount chamber temperature sensor in some logical place  | 03.07.2025 |   |   |
+| ✅  | Mount chamber temperature sensor in some logical place  | 03.07.2025 | 23.04.2026 | Mounted on rear gantry rail |
 | ✅ | Unclog nozzle | 04.07.2025 | 05.07.2025  | cleaning filament fixed it |
 | ⚠️ | Endstop z still triggered after retract | 22.07.2025 | 22.07.2025  | added information how to fix it @gro  |
-| ✅ | Mount filament sensor | 4.08.2025 | 4.08.2025 |  |
+| ✅ | Mount filament sensor | 4.08.2025 | 4.08.2025 |   |
+| 🔲 | Add filter fan to start/end macros | 4.08.2025 |   |   |
+| ⚠️ | Print and mount PEI stop | 12.08.2025 | 21.04.2026 | [[https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/Itzo1978/PEI_Stop|Link]] \\ Printed both out of PCCF \\ mounted one near the switch \\ the other spot is blocked by nozzle cleaning things |
+| ✅ | Better Filament sensor mount/better PTFE path | 12.09.2025 | 23.04.2026 | 2026-04-21 - replaced the PTFE tubes with less-restrictive ones \\ 2026-04-23 - filament path starts with the sensor; is now entering from front/top \\ Top-right door hinge is combined with a spoolholder |
+| 🔲 | Thermal expansion calculation | 16.12.2025 |  | [[https://www.klipper3d.org/Bed_Level.html#determining-thermal-expansion]] |
+| ✅ | Better door mounts | 21.04.2026 | 29.04.2026 | New [[https://code.hackerspace.pl/ar/objects/src/branch/meow/hswaw-voron-2.4/front-doors.FCStd|door design]] by Ari |
+| ✅ | Mildly loose power inlet | 21.04.2026 | 24.04.2026 | A tiny bit of CA glue helped |
+| ⚠️ | Outdated system and klipper | 21.04.2026 | | currently runs debian 11, and somewhat dated version of klipper \\ Will attempt NixOS-ification and importing into hscloud. \\ 02.05.2026 - updated klipper as part of toolboard setup |
+| 🔲 | If front Z-towers are noticeably below back towers, quad gantry leveling can fail with \\ ''Probe triggered prior to movement'' | 23.04.2026 | |  |
+| ✅ | Homing on Z sometimes misses the switch. Higher chances on first homing on boot | 23.04.2026 | <del>02.05.2026</del> \\ 03.05.2026 | Was caused by toolhead wiring hitting other printer parts. \\ Fixed by installing a toolboard and replacing wiring with CAN \\ Actually fixed by eliminating belt rubbing on X axis plastic |
+| ✅ | USB port on HDMI screen seems dead | 23.04.2026 | 04.05.2026 | Reused HDMI screen from Kodak, and mounted it in a bit more permanent manner on top of the left door |
+| ✅ | Max Z too high - the printer makes unhappy noises above Z=290 | 23.04.2026 | 23.04.2026 | Limited Z in config to 290 |
+| ✅ | Hotend power wires are sus | 25.04.2026 | 02.05.2026 | Toolhead wiring replaced with CAN and a toolboard  |
+| ✅ | Uneven belt tensioning | 03.05.2026 | 03.05.2026 | |
+| ⚠️ | Belt rubbed on plastic  | 03.05.2026 | 03.05.2026 | The plastic part was ground down using a belt-grinder, but will need slight redesign and reprint |
 ===== Possible improvements =====
   * ✅ Add nozzle cleaning brush and add macro - added 29.06.2025
   * 🔲 Add [[https://github.com/nevermore3d/Nevermore_Micro|nevermore]]
-  * 🔲 Add filament sensor and add configuration
+  * ✅ Add filament sensor and add configuration
   * 🔲 Create git repository for config
   * ✅ [[https://mods.vorondesign.com/details/lfgs0JTBsEuGyxi8Qxkg|Holder for revo nozzles ]]
   * ✅ LED lights 95% done
+  * Better hotend (revo has low Volumetric Flow Rate) [[https://web.archive.org/web/20250614051844/https://e3d-online.com/pages/revo-nozzle-maximum-flow-rates|Web archive e3d revo max flow rate]])
+  * RockNRoll [[https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/RockNLol/RockNRoll]]
+  * Roller brackets [[https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/ommy/roller_brackets]]
+  * Pullout electronic shelf [[https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/ZZP8202/Pull-out_electrical_store]]
+  * Different nozzle holder [[https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/baccula/revo_skirt_nozzle_holder]]
+  * Print profile covers [[https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/chri.kai.in/20x20mm_Profile_Covers]]
 ===== Voron Rescue Mission =====