Differences

This shows you the differences between two versions of the page.

--- infra:tools:prusa-core-one-l [2026/03/11 08:31] – ar
+++ infra:tools:prusa-core-one-l [2026/10/18 20:48] (current) – [Prusa Core One L] ar
@@ Line 7: / Line 7: @@
 | Model | [[https://www.prusa3d.com/product/prusa-core-one-l-advanced-filtration-bundle/|Prusa Core One L]] |
 | Owner | [[people:ar:start|ari]] |
-| Hostname/web interface | http://yamata-no-orochi.waw.hackerspace.pl/ |
+| Hostname/web interface | http://prusa-core-one-l.waw.hackerspace.pl/ |
-| Currently installed hotend+nozzle | standard (not hardened) 0.4mm |
+| Currently installed hotend+nozzle | hardened 0.4mm |
+| Usage policy | please ask [[people:ar:start|ari]] before first use |
 Hostname choice is a reference to [[https://en.wikipedia.org/wiki/Yamata_no_Orochi|Yamata no Orochi]], mostly becaue of the planned INDX upgrade.
@@ Line 14: / Line 15: @@
 ===== Usage =====
-The printer's left at the hackerspace for the general use of hackerspace members. Feel free to use, but:
+The printer's left at the hackerspace for the general use by hackerspace members. Feel free to use, but:
   * if there's any problem with it, contact ari, preferably highlighting on [[https://matrix.to/#/#druk3d:hackerspace.pl?via=hackerspace.pl&via=matrix.org&via=0x3c.pl|#druk3d]] matrix channel.
+  * there's a printer manual in the accessories box. feel free to consult it if something's unclear.
+  * printer has automatically operated vent holes on top. no need to keep the door open when printing with low-temperature filaments
+  * leave the pendrive inserted in the printer front panel. it's unhappy without it and needs it to store gcode.
+  * the printer has its own [[https://www.prusa3d.com/pl/produkt/buddy3d-camera-for-prusa-core-one/|camera]]. it locally exposes an rtsp stream at %%rtsp://10.11.1.38/live%% and is mounted in the top front left corner of the printer but it's otherwise not integrated.
+==== Loading filament ====
+Filament is loaded from the right side, through the short PTFE tube.
+==== Printer profiles ====
+Since it's a Prusa printer, the most well-polished profiles will be present in Prusa Slicer.
+Orca Slicer 2.3.2 also has profiles for this printer.
+=== Network connectivity ===
+Printer is connected to the network using an ethernet cable in the back.
+Verify password in settings on the printer itself if in doubt. Avoid clicking "generate", as this will break settings for other users.
+== Prusa Slicer ==
+Add the printer as a "physical printer", and set the following values:
+| Host Type | PrusaLink |
+| Hostname, IP or URL | 10.11.1.37 |
+| Authorization Type | API key |
+| API Key / Password | xdskHFCQVoCXebH |
+{{.:pasted:20260311-092543.png}}
+{{.:pasted:20260311-092640.png}}
+{{.:pasted:20260311-091732.png}}
 ===== "improvements"/mods =====
-Don't.
+Generally, don't.
-Currently installed the official "advanced filtration" module, and planning to install a Bondtech INDX system on it when that becomes available.
+  * installed the official "advanced filtration" module
+  * planning to install a Bondtech INDX system on it when that becomes available
+  * door on the side protecting filament spool from hackerdust