Commercially available printer inspired by Voron 2.4, at ridiculous size - 50×50cm

http://inari.waw.hackerspace.pl/

Hostname choice is a reference to Inari Ōkami

Owner: ari

• idle after startup: 18W
• bed pre-heat: 1133W
• printing:
  • PETG: between 400W and 750W; 25-40% duty cycle on heatbed at 80°C

Don't.

There are printer profiles provided by Sovol: https://github.com/Sovol3d/Sovol-OrcaSlicer/releases/download/v2.3.0.4/Sovo.Profilesl.zip

Importing “system” profiles in OrcaSlicer is rather annoying. Here's a naive approach to embed them at build time using Nix. Fair warning: this causes a rather lengthy rebuild; there has to be a better way:

  environment.systemPackages = [
    (let
      sovol-profiles = pkgs.fetchzip {
        url =
          "https://github.com/Sovol3d/Sovol-OrcaSlicer/releases/download/v2.3.0.4/Sovo.Profilesl.zip";
        hash = "sha256-CvcM3Cst35Bz2lloejkKsSla1qrHHuDMxU67da5eHVs=";
      };
    in pkgs.orca-slicer.overrideAttrs (old: {
      prePatch = old.prePatch + ''
        rm -rf resources/profiles/Sovol resources/profiles/Sovol.json
        cp --target-directory=resources/profiles -r ${sovol-profiles}/*
      '';
    }))
  ];