Commercially available printer inspired by Voron 2.4, at ridiculous size - 50×50cm

http://inari.waw.hackerspace.pl/

Hostname choice is a reference to Inari Ōkami

Owner: ari

• idle after startup: 18W
• bed pre-heat: 1133W
• printing:
  • PETG: between 320W and 750W; 25-40% duty cycle on heatbed at 80°C

Don't.

There are printer profiles provided by Sovol: https://github.com/Sovol3d/Sovol-OrcaSlicer/releases/download/v2.3.0.4/Sovo.Profilesl.zip

I've opened a PR in OrcaSlicer to import the relevant ones for this printer into OrcaSlicer. Hopefully this will get merged in time to get included in v2.3.1 release.

Importing “system” profiles in OrcaSlicer is rather annoying. Here's a naive approach to embed them at build time using Nix. Fair warning: this causes a rather lengthy rebuild; there has to be a better way:

  environment.systemPackages = [
    (let
      sovol-profiles = pkgs.fetchzip {
        url =
          "https://github.com/Sovol3d/Sovol-OrcaSlicer/releases/download/v2.3.0.4/Sovo.Profilesl.zip";
        hash = "sha256-CvcM3Cst35Bz2lloejkKsSla1qrHHuDMxU67da5eHVs=";
      };
    in pkgs.orca-slicer.overrideAttrs (old: {
      prePatch = old.prePatch + ''
        rm -rf resources/profiles/Sovol resources/profiles/Sovol.json
        cp --target-directory=resources/profiles -r ${sovol-profiles}/*
      '';
    }))
  ];