This is an old revision of the document!
Come on and DSLAM!
Two Siemens Surpass DSLAMs, one ADSL one VDSL.
mciancia, implr and q3k are looking at this.
Access
Lab ADSL DSLAM (HiX 5620 A50) can be reached by telnet 185.236.240.67 2137 from boston-packets or the space LAN.
Downloads
Documentation and firmware (search engine proof):
aHR0cHM6Ly9vYmplY3QuY2VwaC13YXczLmhzd2F3Lm5ldC9xM2stcGVyc29uYWwvMDdjYjZhYWIz NmY2ZjI0YThhNGVmOTkzMmIxNzNiMWZhMDdkMzI1NWU5NmVkYjI2NjMzYmU4YmVhM2Y4YTIxNy50 YXIK
FXS
We have a companion FXS rack device, Audio Codes MP-124D/FXS/AC. It's currently at q3k's place.
Components
- Main MCU: PowerQUICC MPC860PZQ80D4
- Line interface: 12x PEB3264 and PEB4266
- Custom ASICs (codecs?): 6x AC482-C (three more footprints unpopulated)
PSU Recap
The caps on the PSU (APSI-605AC Rev.C) are bad. Here's the values jotted down so that q3k can order some new ones:
- C9: 470uF 63V
- C10: 470uF 63V
- C14: 470uF 63V
- C15: 220uF 100V
- C17: 220uF 100V
470uF/63V caps are 20mm tall, 16 mm diameter, 7mm leg pitch. 220uF/100V caps are 25mm tall, 16mm diameter, 7mm leg pitch. The board came with Nichicon branded caps. C19 is visible bulged. C10 is burst. The rest look fine, but should be replaced regardless.
There's other, lower voltage caps that look fine that we'll probably leave be for now.
There's also a primary side 100uF/400V cap that has been measured to be ~97uF, which is good enough so is also left alone for now.