This is an old revision of the document!
Table of Contents
Polycom Pano Hax
Bringing Linux and Other Operating Systems to the Polycom Pano.
Work in progress, no end-user guide yet!
Hardware
Jetson TX1 module + Polycom carrier board.
TX1
Stock module, probably 4GiB LPDDR4 and 16GB eMMC?
I/O
| Port | Description |
|---|---|
| 2x GbE | 1x PoE, in wired to on-board USB3-ethernet adapter, 1x Non-PoE port wired directly to TX1-internal USB3-ethernet adapter |
| 2x USB | USB A 2.0 (OTG, upper) + USB A Super Speed |
| HDMI Out | Directly from TX1 |
| HDMI In | Through ??? under a metal can. |
| DC In | Labeled 54VDC, runs from 31VDC min. |
| WiFi? Antenna | Built-in Jetson TX1 2.4 + 5G radio |
| Button | Capacitive touch + indicator LED |
Stock Software
It's running highly customized Android.
Serial port exposes password prompt. Unencrypted update bundle from Polycom/HPE reveals default password: EyZeBuYTQ - this should land a user shell, from which su just gets you root access.
“Devfeatures” (disabled iptables firewall, enabled adb, disabled serial password, enabled telnet I think) can be enabled via fw_setenv devfeatures true. fw_printenv can be used to check current environment variables.
Jetson TX1 is SecureBoot/Production-fused. Standard CBoot (first-stage bootloader) is unlocked ie. it does not do any signature verification over loaded boot partition or the operating system altogether.
Flashing
Flashing is possible via Fastboot over USB-A 2.0 connector (via cursed USB A-A or USB A-C connector). In order to enter Fastboot you can either:
reboot bootloaderfrom Android firmware- Use customized fusee-launcher with
force_fastboot.binpayload:./fusee-launcher.py -w -V 0x0955 -P 0x7721 force_fastboot.bin